What rim size with Tokico/eibach pro

Reply Subscribe

Thread Tools

Search this Thread

Sep 12, 2006 | 04:42 PM

#26

AzEKnightz

Thread Starter

Rotary Freak

iTrader: (24)

Joined: Apr 2005

Posts: 2,488

Likes: 8

From: California, SF

Quote:

Originally Posted by rynberg

The sticky represents the MINIMUM offset you should run, not the IDEAL!

Ideal offset is always +50. You get as close to that as you can, given the offsets available.

Ahhh, thanks for clarifying that for me. Now that really cleared things up in my mind. Thanks.
-Eric

Sep 14, 2006 | 07:58 PM

#27

Qball

Comp Yellow Mica

Joined: Jan 2002

Posts: 516

Likes: 0

From: california

i have blitz technospeeds on my eibach/tokico illumina setup.

i dont know why you would be concerned with rubbing. the car is barely an inch lower than stock. there's a little over a two finger gap. im going to rip these out, slap in some apexi exv's and slam to the ground when i get bored.

i have 18x8 up front with 225/40 and 18x10 with 255/35 falken 452's. i forgot the offsets but its in the 40s.

Sep 14, 2006 | 08:47 PM

#28

Mahjik

Mr. Links

iTrader: (1)

Joined: Aug 2001

Posts: 27,595

Likes: 43

From: Kansas City, MO

Quote:

Originally Posted by Qball

i have 18x8 up front with 225/40 and 18x10 with 255/35 falken 452's. i forgot the offsets but its in the 40s.

Your 225's up front are the reason. Try running a 255 or something large up front and you will start rubbing on corners or driveway lips.

Sep 14, 2006 | 08:51 PM

#29

AzEKnightz

Thread Starter

Rotary Freak

iTrader: (24)

Joined: Apr 2005

Posts: 2,488

Likes: 8

From: California, SF

Quote:

Originally Posted by Qball

Just like Mahjik mentioned, you have 225, i had 245/40/18 up front and it rubs like krazy. And I believe my offset might be a bit off, not quite sure yet because the rim is in SF and I am now in Fremont for school. But I am planning to slam some Tein SS with it and might as well try to fix my offset so i wont have any rubbing. =)