What offset should i run? (Fikse FM10's)
#1
Full Member
Thread Starter
Join Date: Aug 2006
Location: usa
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
What offset should i run? (Fikse FM10's)
Car is a '93 fd with H&R springs and koni's. Im planning on running 17X8.5 up front with a 235/40/17 tire. And 17x10 out back with a 275/40/17 tire. I think Fikse can custom make the offsets for me when i order the wheels so what should i go with? I was thinking 44 for the rear and 37 for the front? what do yall think? thanks
#3
Original Gangster/Rotary!
iTrader: (213)
IIRC I was running 37-38 in front and 44-45 in rear, so you're spot on.
17x8.5 and 17x10 with 245/40 and 275/40. Only bad thing about the 275/40 is the tall diameter of ~25.7 inches, which will slow you down a bit due to it's effect on your gearing. I ended up going with 4.3 final drive to counteract it a bit.
Where are you getting the Fikses? I might have a source, PM me.
17x8.5 and 17x10 with 245/40 and 275/40. Only bad thing about the 275/40 is the tall diameter of ~25.7 inches, which will slow you down a bit due to it's effect on your gearing. I ended up going with 4.3 final drive to counteract it a bit.
Where are you getting the Fikses? I might have a source, PM me.
Thread
Thread Starter
Forum
Replies
Last Post
The Shaolin
2nd Generation Specific (1986-1992)
9
09-14-15 07:50 PM
MILOS7
3rd Generation Specific (1993-2002)
10
08-19-15 07:25 AM