What lowering springs do you have??
#1
...
Thread Starter
Join Date: Aug 2001
Location: Tampa, FL
Posts: 7,539
Likes: 0
Received 0 Likes
on
0 Posts
What lowering springs do you have??
I was just wonderin what kind of springs you have and how much they lower your car? Also what are your opinions on the ryde? Thanks.
Chris
Chris
#5
Senior Member
Join Date: Feb 2001
Location: Suwanee, Ga
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
springs
have ST BOESO dual spring coil overs on front(Ebachs springs) just put on a set of Ground Controls on last night in the rear. lowered the car about an inch to a inch and half. Running 18 all the way around. setting ground to wheel well 24" in front and 25" in rear. so far no problems.
#6
Junior Member
Join Date: Aug 2001
Location: Tucson, AZ
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
I have Bilstein struts and Grex 1" lowering springs. I have 17" Blitz type 03's with 235 45 in the front and 245 45 in rear. Looks and rides good.
matt
94 RX7
336hp & 272 lbs/ft of trq.
matt
94 RX7
336hp & 272 lbs/ft of trq.
Trending Topics
#8
Full Member
Join Date: Apr 2001
Location: New Orleans, LA
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
I used to have the Racing Beat springs with Tokico shocks. Ride height measured ground to top of wheel well was 25 in. rear and 24-1/2 in. front. Stock ride height was at least 26 in., the RB springs lowered the car alot. I got rid of this set-up a few months ago because the RB springs were way too soft for that low of a ride height. I had prolems with bottoming alot and the front tires (245/45/16) rubbing on the top of the plastic fender liner. I was also hitting the bump stops in long sweeping turns.
Now I have the M2/AD coil overs with 550/450 lb/in Eibach ERS. They're adjusted to 25 in. ride height all around. No more bottoming and much better control, especially coming out of corners. Jack
Now I have the M2/AD coil overs with 550/450 lb/in Eibach ERS. They're adjusted to 25 in. ride height all around. No more bottoming and much better control, especially coming out of corners. Jack
Thread
Thread Starter
Forum
Replies
Last Post
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM