What all parts needed to correct camber all the way around? FD
#1
ViperSlayer
Thread Starter
iTrader: (3)
Join Date: Feb 2008
Location: MO
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
What all parts needed to correct camber all the way around? FD
Hey guys, I'm having a custom set of 3pc forged wheels made right now and plan on lowering it quite a bit once they arrive with new Stance GR Pro coil overs. That being said, I have searched and so far I have only found adjustable trailing arms and toe control. What else is needed to correct the camber all the way out of the front and rear? The tires alone cost $2200 and I don't want to even second guess getting a correct alignment. Help me out.
#2
needs more track time
iTrader: (16)
The FD does not require camber correcting kits. Its got a real suspension.
Do yourself a favor and learn a bit more about the car before pissing money away on parts you might not need. Read the archives and the FAQ thread in the 3rd gen section.
Read this suspension thread also https://www.rx7club.com/suspension-wheels-tires-brakes-20/howard-colemans-fd-chassis-setup-723617/
Do yourself a favor and learn a bit more about the car before pissing money away on parts you might not need. Read the archives and the FAQ thread in the 3rd gen section.
Read this suspension thread also https://www.rx7club.com/suspension-wheels-tires-brakes-20/howard-colemans-fd-chassis-setup-723617/
#3
ViperSlayer
Thread Starter
iTrader: (3)
Join Date: Feb 2008
Location: MO
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
I read through Howards' post a few weeks back. I've been doing alot of reading and researching on this board but can't find much about adj camber bars for the FD. I guess it could be because the stock ones are fine but I would appreciate a confirmation on that.
Thread
Thread Starter
Forum
Replies
Last Post
David Hayes
3rd Generation Specific (1993-2002)
13
09-05-22 12:45 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM