Will I run into any rubbing issues with the following set up?

18x8 / 46 offset with 225/40/18 tire
18x9 / 44 offset with 265/35/18 tire

I've checked this setup with the JimLab tire and wheel sizing spreadsheet and got the following results:

front outer clearance = 0.81"
front inner clearance = 1.19"

rear outer clearance = 0.48"
rear inner clearnce = 0.52"

Is the spreadsheet fairly accurate? Any other recommendations for tire size? Can I go wider on the front? like, 245/35/18 perhaps and still avoid rubbing issues? I'm also running on coilovers which i believe is actually smaller than the stock springs and shock assembly. So, I think I should be good as far as inner clearance goes. Any thoughts?

Thanks for any input.

 

The setup would fit fine, but you could fit 235/40 up front.

Actually, you could run the 18x9 +44 all around with 255/35s and be able to rotate tires.

 

thanks for the input rynberg! actually, I already bought the rims 18x8 and 18x9, front and rear. So, I guess I'll just have to go with 235 front and 265 rear as you have suggested. Thanks.