tenzo r type m
#1
Full Member
Thread Starter
Join Date: Dec 2007
Location: virginia
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
tenzo r type m
what do you think of the Tenzo R type M in black on my 93 VR R1?
http://www.vividracing.com/catalog/t...8ts7riff2fint0
they only come in 18x8 though, and i would want wider in the rear... maybe the 19x10 would fit? any thoughts?
http://www.vividracing.com/catalog/t...8ts7riff2fint0
they only come in 18x8 though, and i would want wider in the rear... maybe the 19x10 would fit? any thoughts?
#3
Banned. I got OWNED!!!
Join Date: Jul 2008
Location: canada
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
That one of my wish list but im afraid if its installed just like stonewall7 said it might be very little dish to the wheels of an FD
________________
Autopartswarehouse
________________
Autopartswarehouse
#6
Full Member
Thread Starter
Join Date: Dec 2007
Location: virginia
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
yeah i wasn't sure what wheels they were talking about... i personally don't like the dish look. at least the wheels that have chrome lips... don't like the chrome...
#7
strike up the paean
the design of the wheels honestly looks pretty rad. i like mesh and i like concave. this blends the two together pretty well.
my concern would be with the quality of the wheel and the weight. tenzo is kind of a pepboys brand wheel. i have no idea if the wheel itself is quality. look into that before you buy.
my concern would be with the quality of the wheel and the weight. tenzo is kind of a pepboys brand wheel. i have no idea if the wheel itself is quality. look into that before you buy.
Trending Topics
#8
Full Member
Thread Starter
Join Date: Dec 2007
Location: virginia
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
the weight is pretty low, at 22 pounds, i believe. as far as quality, i don't know. they don't make any 18's wider than 8" though, so i'll probably look for something else. i'm not looking to spend $3000 on wheels, but whatever i do spend, i would not want failing on me.
#11
Rotary Enthusiast
iTrader: (4)
usually the concave face is only offered on the low offset versions, thats probably what people are talking about "dish". Like on work cr kai's, volk te37, fno1rc, ect, only the low offset ones have the nice concave face, the ones that most people pick for FD's is ugly flat face due to the high offsets.
#14
I can confirm.
iTrader: (3)
you might want to check with someone who deals alot with wheels like Rishie from autoRND. the concave face is not always true with low offsets depending on the company. the offset might be lower but if its a "high profile" wheel, then it'll be deeper only where the lugs go, not the whole face of the wheel. check and make sure before you order. good luck
Thread
Thread Starter
Forum
Replies
Last Post
Snook
3rd Generation Specific (1993-2002)
23
09-30-15 11:36 AM