Project Mu BBK + RPF1

Reply Subscribe

Thread Tools

Search this Thread

Feb 23, 2010 | 10:56 AM

eoph

Thread Starter

Senior Member

Joined: Aug 2003

Posts: 665

Likes: 0

From: canada

Project Mu BBK + RPF1

Would Project Mu's Forged 4 Piston BBK clear 17x9.5 RPF1s?

Rotor = 345mm×32mm
Caliper = 282.8mmx156.25mmX72.3mm

Feb 23, 2010 | 12:58 PM

ARD T2

Rotary Freak

iTrader: (22)

Joined: Mar 2001

Posts: 2,775

Likes: 17

From: Silicon Valley, CA.

Is this for FD?

Those measurements won't tell you much.

You need to get a clearance drawing from Project Mu/Mackin Industries in order to have a proper comparison.

Rishie

Feb 23, 2010 | 02:47 PM

monkey_majic

Full Member

iTrader: (5)

Joined: Aug 2009

Posts: 165

Likes: 0

From: south africa

I have a big brake kit on my rx7 with a 356 rotor and it just fits under my 18x10 so I don't think they will fit under 17 inch rims.

Feb 23, 2010 | 10:46 PM

ARD T2

Rotary Freak

iTrader: (22)

Joined: Mar 2001

Posts: 2,775

Likes: 17

From: Silicon Valley, CA.

Actually now that you mention that i'm pretty sure these won't work due to the design of the RPF1 inner barrel. There will probably be interference where the drop center is.

rishie

Feb 23, 2010 | 11:08 PM

Miata_mx5

Wangan Nasty

Joined: Apr 2006

Posts: 1,779

Likes: 3

From: Irvine, Southern California

Need a caliper drawing.

Feb 25, 2010 | 03:24 PM

eoph

Thread Starter

Senior Member

Joined: Aug 2003

Posts: 665

Likes: 0

From: canada

Would the drawings be on their website?
http://www.project-mu.co.jp/ja/products/cali_f4x4.html

I was searching, and the 345mms do fit on an NSX with 17" rims (not RPF1), but RPF1's are suppose to be rather bad with brake clearance.

Feb 26, 2010 | 12:05 AM

eoph

Thread Starter

Senior Member

Joined: Aug 2003

Posts: 665

Likes: 0

From: canada

They are also suppose to fit under Nismo LMGT4 17x9, so would the inside barrel be comparable to the RPF1s?

Reply Subscribe