RX7Club.com - Mazda RX7 Forum - Project Mu BBK + RPF1

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- Suspension/Wheels/Tires/Brakes (https://www.rx7club.com/suspension-wheels-tires-brakes-20/)

- - Project Mu BBK + RPF1 (https://www.rx7club.com/suspension-wheels-tires-brakes-20/project-mu-bbk-rpf1-889025/)

eoph	02-23-10 10:56 AM

Project Mu BBK + RPF1

Would Project Mu's Forged 4 Piston BBK clear 17x9.5 RPF1s?

Rotor = 345mm×32mm
Caliper = 282.8mmx156.25mmX72.3mm

ARD T2

02-23-10 12:58 PM

Is this for FD?

Those measurements won't tell you much.

You need to get a clearance drawing from Project Mu/Mackin Industries in order to have a proper comparison.

Rishie

monkey_majic

02-23-10 02:47 PM

I have a big brake kit on my rx7 with a 356 rotor and it just fits under my 18x10 so I don't think they will fit under 17 inch rims.

ARD T2

02-23-10 10:46 PM

Actually now that you mention that i'm pretty sure these won't work due to the design of the RPF1 inner barrel. There will probably be interference where the drop center is.

rishie

Miata_mx5

02-23-10 11:08 PM

Need a caliper drawing.

eoph	02-25-10 03:24 PM

Would the drawings be on their website?
http://www.project-mu.co.jp/ja/products/cali_f4x4.html

I was searching, and the 345mms do fit on an NSX with 17" rims (not RPF1), but RPF1's are suppose to be rather bad with brake clearance.

eoph	02-26-10 12:05 AM

They are also suppose to fit under Nismo LMGT4 17x9, so would the inside barrel be comparable to the RPF1s?

All times are GMT -5. The time now is 06:22 PM.