Post Pics of your FD Wheel Fitment!!
#2382
Need some input/help if you all have any
I have seen multiple setups on here and had some questions of my own. I am looking into the 2 following specs for a set of te37. Car will be on ohlins coils for reference. How big of a difference do the two have in making it work on a stock body FD?
18x10 +39
18x10.5 +15
I have seen a lot of input on the 18x10.5 +15 fit, but not more than a pull and roll. I also am not interested in doing much of a tire stretch.
I have seen multiple setups on here and had some questions of my own. I am looking into the 2 following specs for a set of te37. Car will be on ohlins coils for reference. How big of a difference do the two have in making it work on a stock body FD?
18x10 +39
18x10.5 +15
I have seen a lot of input on the 18x10.5 +15 fit, but not more than a pull and roll. I also am not interested in doing much of a tire stretch.
#2383
Junior Member
iTrader: (1)
Join Date: Dec 2016
Location: Phoenix, Arizona
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Need some input/help if you all have any
I have seen multiple setups on here and had some questions of my own. I am looking into the 2 following specs for a set of te37. Car will be on ohlins coils for reference. How big of a difference do the two have in making it work on a stock body FD?
18x10 +39
18x10.5 +15
I have seen a lot of input on the 18x10.5 +15 fit, but not more than a pull and roll. I also am not interested in doing much of a tire stretch.
I have seen multiple setups on here and had some questions of my own. I am looking into the 2 following specs for a set of te37. Car will be on ohlins coils for reference. How big of a difference do the two have in making it work on a stock body FD?
18x10 +39
18x10.5 +15
I have seen a lot of input on the 18x10.5 +15 fit, but not more than a pull and roll. I also am not interested in doing much of a tire stretch.
I run 18x10.5 +22 with a 285/30/18 rear. I'm lowered on Teins with an aggressive roll and in the rear I'm still rubbing a little during hard cornering. Front's I have 18x9.5+22 no issues really
I think you would need roll/pull if you don't want a stretched w/ a +15 on 10.5 wide (depending on how low you go)... I could be wrong...
#2384
Rotary Motoring
iTrader: (9)
Javi.NES
Need some input/help if you all have any
I have seen multiple setups on here and had some questions of my own. I am looking into the 2 following specs for a set of te37. Car will be on ohlins coils for reference. How big of a difference do the two have in making it work on a stock body FD?
18x10 +39
18x10.5 +15
I have seen a lot of input on the 18x10.5 +15 fit, but not more than a pull and roll. I also am not interested in doing much of a tire stretch.
I have seen multiple setups on here and had some questions of my own. I am looking into the 2 following specs for a set of te37. Car will be on ohlins coils for reference. How big of a difference do the two have in making it work on a stock body FD?
18x10 +39
18x10.5 +15
I have seen a lot of input on the 18x10.5 +15 fit, but not more than a pull and roll. I also am not interested in doing much of a tire stretch.
I am going to assume you mean stock body FD but with rolled front and rear fenders and some camber.
By the sizes/offset listed it looks like you are considering a couple different styles of TE37 looking at what is currently available.
18x10 +39 is available in the "TE37SL Black EditionII"
18x10.5 +15 is available in the "TE37SL"
Though 18x10.5 +14 is available in the "TE37SL Black EditionII" which is pretty much the same for fitment.
The 18x10 +39 will fit a stock body FD with rolled front fenders, 2.5deg front negative camber and stock rear fenders with -1.3deg rear camber and a 265/35-18. Only issue I had with similar set-up is 265/35-18 is a bit too tall of a tire up front and will rub the plastic fender liners when turning. 255/35-18 would fix that issue.
On the 18x10.5 +15 a 215/40-18 would fit the same for the tire as the above and the wheel lip would stick out 30mm away from the body of the car.
Online Wheel and Tyre Fitment Calculator. Offset, Tyre Stretch and Speedo Error | Will They Fit
I would NOT do the 18x10.5 +15 with 215/40-18.
The 18x12 +26 "TE37SAGA" with a 255/35-18 fits only 8mm further out than that so could be done with a roll with some pull front and rear...
Online Wheel and Tyre Fitment Calculator. Offset, Tyre Stretch and Speedo Error | Will They Fit
Not sure why you don't list the 18x10.5 +22 "TE37SL" or the 18x10.5 +21 "TE37SL Black EditionII"
Which would fit allow a 235/35-18 and the wheel lip would stick out 24mm from the 18x10 +39.
Online Wheel and Tyre Fitment Calculator. Offset, Tyre Stretch and Speedo Error | Will They Fit
Even better would be the new "TE37SAGA" which is available in 18x10.5 +24 which would fit 245/35-18 and the wheel would stick out 21mm from the 18x10 +39.
Bonus, it has the aggressive Face 4 available.
http://www.willtheyfit.com/index.php?width=265&aspect=35&diameter=18&wheelwid th=10&offset=39&width2=245&aspect2=35&wheel_size=1 8&wheel_width=10-5&offset2=24
https://www.rayswheels.co.jp/product...wheel=TE37SAGA
Volk doesn't make a wide wheel (over 10" wide) with an offset that fits the stock body FD well, but they do make 18x11 +55 "TE37RT" for Porsche. With a 20mm 5x114.3 to 5x130 adapter spacer that makes it 18x11 +35 so you could fit 255/35-18 with the tire tucking the same as 18x10 +39 and the wheel sticking out just 17mm (so better fitment with the 18x11 than all the 18x10.5 offered).
Online Wheel and Tyre Fitment Calculator. Offset, Tyre Stretch and Speedo Error | Will They Fit
I wish Rays Engineering would at least make the TE37 fitments they do for Porsche machined for 5x114.3mm bolt pattern...
Last edited by BLUE TII; 12-07-17 at 12:30 PM.
#2385
This guy!
Yes, I was looking into several options. I was looking into doing a squared "mildly aggressive" setup.
The wheel setup I am looking at is the 18x10 +39 it is a te37 OG setup, not the SL. "Real" forging vs flow form forging. I understand there will be some mild fender work, rolling, and some camber which I am not opposed to. I am just not interested in doing the crazy stretch style. Id also like to add that I am not a fan of spacers either, but if theyre needed at a small degree then sure. I see you were running a 265/35 tire and stated the inner liner would rub, how bad? What tire were you running, and how low?
Yes, I was looking into several options. I was looking into doing a squared "mildly aggressive" setup.
The wheel setup I am looking at is the 18x10 +39 it is a te37 OG setup, not the SL. "Real" forging vs flow form forging. I understand there will be some mild fender work, rolling, and some camber which I am not opposed to. I am just not interested in doing the crazy stretch style. Id also like to add that I am not a fan of spacers either, but if theyre needed at a small degree then sure. I see you were running a 265/35 tire and stated the inner liner would rub, how bad? What tire were you running, and how low?
Last edited by Javi.NES; 12-07-17 at 09:42 PM.
#2386
Rotary Motoring
iTrader: (9)
When I ran the 18x10.5 +38 with Federal 595-RS 265/35-18 the front tire rubbed lightly on the inside of the fender liner just below where you see the plastic in the engine bay when I turned the steering wheel because the tires were too tall. The tires would also rub the factory mud flap on the back of the fender arch slightly and much more than slightly as any debris would build up there between the fender sheet metal and the mud flap.
When I went to 18x11 +45 with the shorter 295/30-18 the rubbing went away.
Ride height
profile
When I switched to 18x11 +45 with 295s
When I went to 18x11 +45 with the shorter 295/30-18 the rubbing went away.
Ride height
profile
When I switched to 18x11 +45 with 295s
#2387
Thats just crazy to think lol
So the thought process is to run a +22 in the rear and a +35 in the front, making a requirement of spacers. 5mm in the front and 17mm in the rear. This SHOULD make a 265/35 tire fit all around with minor work.
I believe "Farkel" was running this setup on set of Advan GT but with A048, making the thread width 10.3 and Diameter 25.2. I will be running a 265 with 9.4 thread width and 25.3 Diameter. Does this make sense to you Blue??
Edit: Just found the link to the advans.
https://www.rx7club.com/wheels-tires...comps-1106783/
So the thought process is to run a +22 in the rear and a +35 in the front, making a requirement of spacers. 5mm in the front and 17mm in the rear. This SHOULD make a 265/35 tire fit all around with minor work.
I believe "Farkel" was running this setup on set of Advan GT but with A048, making the thread width 10.3 and Diameter 25.2. I will be running a 265 with 9.4 thread width and 25.3 Diameter. Does this make sense to you Blue??
Edit: Just found the link to the advans.
https://www.rx7club.com/wheels-tires...comps-1106783/
#2389
Fitment was more of the question.
I decided against the square setup. It just doesnt make sense for what I want, and I am not a big fan of running spacers and not even sure why I considered running that much to begin with. The searching continues.
Thanks for the help Blue!
I decided against the square setup. It just doesnt make sense for what I want, and I am not a big fan of running spacers and not even sure why I considered running that much to begin with. The searching continues.
Thanks for the help Blue!
#2392
#2394
Make an assessment...
iTrader: (3)
However, pull those fenders or get some over fenders and you'll be set.
#2395
#2396
I'm gonna go with absolutely not. I have 18x11.5 +12 with 285/30 but I also have my fenders pulled about 2". MAYBE if you ran a retarded amount of stretch and negative camber, MAYBE. But it would be (and look) absolutely idiotic, along with not being functional in the least. Sorry man. lol
However, pull those fenders or get some over fenders and you'll be set.
However, pull those fenders or get some over fenders and you'll be set.
Gotcha! Thank you for the reply!
#2400
Went ahead and installed the Ohlins coilovers this past weekend as wheels are expected to arrive this week.
Waiting for everything to settle to make adjustments, getting fenders rolled tomorrow as my driver side fender has rubbed with current wheels as you can see.
First alignment prior to wheels will be done this Friday. Love how they ride compare to stock, a lot smoother than expected.
Waiting for everything to settle to make adjustments, getting fenders rolled tomorrow as my driver side fender has rubbed with current wheels as you can see.
First alignment prior to wheels will be done this Friday. Love how they ride compare to stock, a lot smoother than expected.