Post Pics of your FD Wheel Fitment!!
#2203
Full Member
Originally Posted by Houstonderk
Not sure why I am loving the change in color so much but I am. I am at that height due to my driveway fyi...
#2206
ADVAN RS II Wheel - 18x8.5 / 5x114.3 / Offset +31
ADVAN RS II Wheel - 18x8.5 / 5x114.3 / Offset +40
ADVAN RS II Wheel - 18x8.5 / 5x114.3 / Offset +51
ADVAN RS II Wheel - 18x9.5 / 5x114.3 / Offset +45
Hello guys, Following the advice Of Rich(GoodfellaFD3S) Going for staggered 18"
235/40-18 in the front and 265/35-18
Which Offset do i need?
Carl
ADVAN RS II Wheel - 18x8.5 / 5x114.3 / Offset +40
ADVAN RS II Wheel - 18x8.5 / 5x114.3 / Offset +51
ADVAN RS II Wheel - 18x9.5 / 5x114.3 / Offset +45
Hello guys, Following the advice Of Rich(GoodfellaFD3S) Going for staggered 18"
235/40-18 in the front and 265/35-18
Which Offset do i need?
Carl
#2209
Work VS-XX Burning Silver Wheels 18x12.5R +26 O disk, 18x9.5F +45 A disk. Ended up putting a 25mm spacer and longer studs on the rear for a more flush look, at the time they did not have a +1, now they do. Might send them in for modifications.
Michelin Pilot Sport PS2 Tires Rear 335/30ZR18, Front 265/35ZR18
Pettit flares Rear, slightly roller fronts
Before I lowered the IC and changed the rear spoiler
Michelin Pilot Sport PS2 Tires Rear 335/30ZR18, Front 265/35ZR18
Pettit flares Rear, slightly roller fronts
Before I lowered the IC and changed the rear spoiler
Last edited by Banzai-Racing; 04-08-16 at 09:23 AM.
#2211
Senior Member
iTrader: (2)
Thanks DeeSan. Few more new ideas still to come. Looking foreward to seeing yours hit the next stage
Thanks- It's a modified Vorschlag rear bumper/cf diffuser & sideskirts.
20x10.5 +23 squared setup, 245/30-20 Sumitomo HTR Z III's
20x10.5 +23 squared setup, 245/30-20 Sumitomo HTR Z III's
#2212
SEMI-PRO
iTrader: (2)
ADVAN RS II Wheel - 18x8.5 / 5x114.3 / Offset +31
ADVAN RS II Wheel - 18x8.5 / 5x114.3 / Offset +40
ADVAN RS II Wheel - 18x8.5 / 5x114.3 / Offset +51
ADVAN RS II Wheel - 18x9.5 / 5x114.3 / Offset +45
Hello guys, Following the advice Of Rich(GoodfellaFD3S) Going for staggered 18"
235/40-18 in the front and 265/35-18
Which Offset do i need?
Carl
ADVAN RS II Wheel - 18x8.5 / 5x114.3 / Offset +40
ADVAN RS II Wheel - 18x8.5 / 5x114.3 / Offset +51
ADVAN RS II Wheel - 18x9.5 / 5x114.3 / Offset +45
Hello guys, Following the advice Of Rich(GoodfellaFD3S) Going for staggered 18"
235/40-18 in the front and 265/35-18
Which Offset do i need?
Carl
#2219
Senior Member
iTrader: (8)
Join Date: Mar 2005
Location: north ca
Posts: 540
Likes: 0
Received 0 Likes
on
0 Posts
Hi
It didn't hit when I make full steering lock with left U turn but inner barrel hit the lower control arm on passenger side with right full lock u turn
It didn't hit when I make full steering lock with left U turn but inner barrel hit the lower control arm on passenger side with right full lock u turn
Last edited by speedsilver7; 04-12-16 at 12:49 AM.
#2221
Rotary Motoring
iTrader: (9)
Did you need any fender work and camber to run this? I'm looking to run 18x10 w/ 265's, but I'm trying to avoid any rolling or any ridiculous amounts of camber.
Your wheel width and tire width aren't the determining factor on fitment.
You didn't state the offset you are trying to use.
Offset is what centers the tire between the fender and suspension.
If you run +50 offset you will have no problems with those sizes.
If you run +38 offset you will have to roll the front fender lip under and run -2.4 degrees camber up front. Rears can be stock fender lips with -1.4 camber.
My old set-up was 18x10.5 +38 and 265/35-18.
It fits the same as my new set-up which is 18x11 +45 and 295/30-18.
Because offset centers the tire between the suspension and the fender.
Play with this site to figure out what I mean if it isn't apparent by reading what I wrote.
Online Wheel and Tyre Fitment Calculator. Offset, Tyre Stretch and Speedo Error | Will They Fit
Your wheel width and tire width aren't the determining factor on fitment.
You didn't state the offset you are trying to use.
Offset is what centers the tire between the fender and suspension.
If you run +50 offset you will have no problems with those sizes.
If you run +38 offset you will have to roll the front fender lip under and run -2.4 degrees camber up front. Rears can be stock fender lips with -1.4 camber.
My old set-up was 18x10.5 +38 and 265/35-18.
It fits the same as my new set-up which is 18x11 +45 and 295/30-18.
Because offset centers the tire between the suspension and the fender.
Play with this site to figure out what I mean if it isn't apparent by reading what I wrote.
Online Wheel and Tyre Fitment Calculator. Offset, Tyre Stretch and Speedo Error | Will They Fit
#2222
Full Member
iTrader: (6)
Sorry, I should have made is really clear - I was inquiring about the specific setup he said he was running, except that I want to run 265's:
I thought that me quoting him implied I was asking (him) about that specific setup. I'm well aware about how offsets work, but thanks for the tips and giving a few examples of the fitment you've run.
From what I've seen so far, 18x10+50 is the spec to run for 285/295's. I dont really plan to run tires that wide, so I'm curious to how much lower of an offset I can go with a 265 since there may be a mild stretch depending on the tire brand/section width. With my experience, tire width, more specifically, the section width, may have a factor on fitment. I ran a 255 on a 17x9 on my S2000 and had no issues with rubbing. I ran the same size, but a different brand, and ended up having to shave some material off the rear bumper tab due to the tire measuring wider than what I was previously running.
I thought that me quoting him implied I was asking (him) about that specific setup. I'm well aware about how offsets work, but thanks for the tips and giving a few examples of the fitment you've run.
From what I've seen so far, 18x10+50 is the spec to run for 285/295's. I dont really plan to run tires that wide, so I'm curious to how much lower of an offset I can go with a 265 since there may be a mild stretch depending on the tire brand/section width. With my experience, tire width, more specifically, the section width, may have a factor on fitment. I ran a 255 on a 17x9 on my S2000 and had no issues with rubbing. I ran the same size, but a different brand, and ended up having to shave some material off the rear bumper tab due to the tire measuring wider than what I was previously running.
Last edited by nitewing117; 04-13-16 at 10:53 PM.
#2225