Post Pics of your FD Wheel Fitment!!
The following 3 users liked this post by undesiredshoe:
The following 3 users liked this post by RX7 RAGE:
#2655
The following users liked this post:
estevan62274 (04-21-23)
#2659
This is not mine, it sold at a dealer in Chicago a year or so ago. I love the look of this and am thinking about putting the same wheels and tires on mine. I think they are Enkei PF01. I can make out the front tires as 255/35ZR18 94V HankookVentus V12. Can any tell me the wheel specs I would need? I'm on Tein Flex Z coilovers. I don't want to have to do any body work anything to make them fit.
Does this work?
Front 18x9.5" +45 offset 255/35/18
Rear 18x10.5" +38 offset 265/35/18
I'd like the max width I can do to get them to sit fairly flush to the fender opening, but without rolling the fenders or having to do body work.
Does this work?
Front 18x9.5" +45 offset 255/35/18
Rear 18x10.5" +38 offset 265/35/18
I'd like the max width I can do to get them to sit fairly flush to the fender opening, but without rolling the fenders or having to do body work.
Last edited by ctirwin; 04-22-23 at 02:21 PM.
The following users liked this post:
Jesturr (04-24-23)
#2660
@fd_dimi on instagram
17x9.5+38 all around.
The following users liked this post:
estevan62274 (08-02-23)
The following users liked this post:
isldr_fc (08-11-23)
#2663
Been scouring this thread for fitment for a past few days and want y'all opinion.
Looking a set of discontinued wheels that I possibly have 2 options for:
18x8 +35(F) and 18x9 +42(R)
or
18x8 +27(F) and 18x9 +28(R)
I understand these may not be the best specs but they're the only ones available, so which would be the most flush to fender without rubbing on stock fenders, no rolled lips but with coilovers to adjust height as necessary? They are 2 piece wheels if that makes any difference
Looking a set of discontinued wheels that I possibly have 2 options for:
18x8 +35(F) and 18x9 +42(R)
or
18x8 +27(F) and 18x9 +28(R)
I understand these may not be the best specs but they're the only ones available, so which would be the most flush to fender without rubbing on stock fenders, no rolled lips but with coilovers to adjust height as necessary? They are 2 piece wheels if that makes any difference
#2664
Joined: Aug 2004
Posts: 4,618
Likes: 120
From: Colorado Springs, CO
18x8 +27(F) and 18x9 +28(R) will be the most aggressive, and I don't believe you'll have any issues fitting those. You might even need spacers to make them flush.
Thread
Thread Starter
Forum
Replies
Last Post