When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Thanks, I'm thinking about eventually (couple months down the line) getting Volk ZE40 in Gold at 18x9.5+22 with 255/35/18 tires on all fours like the one posted above. Anyone have any suggestions on fitment on these wheels?
For now I'm just going to raise the rear to 24.5-25 and toy around with ride height a bit to see what I like the best.
Can anyone tell me if wirk wheels o disc will clear front oem fd calipers? 18x9.5 +32 o disk to be 100%
Possible.
O disk shockingly cleared my Project Mu 4 piston x 4 pad SLIM calipers by about 1-2mm, which shouldn't be far off from OEM calipers... But to be safe you should go A-disk.
good luck.
Thanks, I'm thinking about eventually (couple months down the line) getting Volk ZE40 in Gold at 18x9.5+22 with 255/35/18 tires on all fours like the one posted above. Anyone have any suggestions on fitment on these wheels?
For now I'm just going to raise the rear to 24.5-25 and toy around with ride height a bit to see what I like the best.
I'd suggest raising the rear about 1cm (no more than 1/2") if you are having clearance issues. The lower profile tyres you suggest will keep your overall height similar. But raising the rear any more than that might make the car look funny. If you want to raise the rears higher, I would raise the front as well. JMHO!
I'd suggest raising the rear about 1cm (no more than 1/2") if you are having clearance issues. The lower profile tyres you suggest will keep your overall height similar. But raising the rear any more than that might make the car look funny. If you want to raise the rears higher, I would raise the front as well. JMHO!
I don’t really have clearance issues but the Coleman thread suggested 25 inches off ground front and rear and drivability will increase a lot so was considering both 25 off the ground front and rear.
Im trying to find Volk ZE40’s in gold and in this fitment but idk if I can even get these custom ordered nor do I know how to, can someone help me out please?
18 X 9.5 front and 18 X10.5 rear. 255s front, 295s rear. Also what would the suggested offset be for front and rear in this fitment?
Been ages since I posted in this thread, but figured I'd share the newest setup. 18x11 +18 TE37SLs with 295/30/18 F, 315/30/18 R Yokohama A052s. Also running a 12mm spacer in the rear
Considering the Advan RGIII rims since it appears, without inquiring directly, that they are in stock.
The fitments that are only available are: Advan RGIII Wheel 18x10.5 5x114.3 15mm Racing Gold Metallic
&
Advan RGIII Wheel 18x9.5 5x114.3 45mm Racing Gold Metallic
Does anyone have any idea what this offset would look like on an FD, and if it would even work without any spacers? I have all 4 of my fenders rolled currently and would be running 25" height to the apex of the fender. Complete noob at figuring this out. Want to run 255 front and 295 rear.
These would be the alignment specs I'd try to get based off Coleman's recommended specs: Toe in front between a 1/16 and 1/8th inch Toe in rear zero Camber front and rear 1.2 degrees negative Caster equal minimal Zero rear thrust angle.
08-19-20, 01:36 PM
