Pic. recuest enkei RPF1 on fc
#5
Eats, Sleeps, Dreams Rotary
iTrader: (19)
Bluem, I'm not sure, but if you PM ARD T2, I'm sure he can point you in the right direction. He's the resident wheel guru.
90FC, they're 17x8f and 9r, wrapped in 235-40f and 245-40r BFG KDWs. The 8's in front are nice because the spoke pattern makes plenty of room for a big brake kit. See how the spokes stick out a little bit compared to the rears?
90FC, they're 17x8f and 9r, wrapped in 235-40f and 245-40r BFG KDWs. The 8's in front are nice because the spoke pattern makes plenty of room for a big brake kit. See how the spokes stick out a little bit compared to the rears?
#6
Breathe...
iTrader: (3)
Join Date: Aug 2003
Location: Space
Posts: 609
Likes: 0
Received 0 Likes
on
0 Posts
picture:
https://www.rx7club.com/midwest-rx-7-forum-32/no-rear-side-maker-illegal-695963/
RPF1 SBC finish 17x9.5+18 (f&R) fronts have 3mm spacer due to my wide tires. 255/40 on all four. wide fenders required front and back, some negative chamber up front with coilovers. If you don't have the power, don't do it. So, yes it is possible...
https://www.rx7club.com/midwest-rx-7-forum-32/no-rear-side-maker-illegal-695963/
RPF1 SBC finish 17x9.5+18 (f&R) fronts have 3mm spacer due to my wide tires. 255/40 on all four. wide fenders required front and back, some negative chamber up front with coilovers. If you don't have the power, don't do it. So, yes it is possible...
Trending Topics
#12
Concept Motorsports
Thread Starter
thanx! turbo23
im looking for a set up that can use the same wheel on all 4's maybe 17x9.5 all arround, this way i can rotate the tires between heats , i can only use 6 new stiker tires per race and 2 used tires.
will i be able to fit 17x9.5 all round with the same tire size with rolled fenders?
im looking for a set up that can use the same wheel on all 4's maybe 17x9.5 all arround, this way i can rotate the tires between heats , i can only use 6 new stiker tires per race and 2 used tires.
will i be able to fit 17x9.5 all round with the same tire size with rolled fenders?
#14
Rotary Freak
Join Date: Apr 2004
Location: Rochester, NY
Posts: 1,579
Likes: 0
Received 0 Likes
on
0 Posts
you should run the 17x9 +22 or +15 all around if you need ONE wheel size for all four corners.
those are such nice wheels!
Turbo23, you need to take even more pics
those are such nice wheels!
Turbo23, you need to take even more pics
#16
Rotary Freak
Join Date: Apr 2004
Location: Rochester, NY
Posts: 1,579
Likes: 0
Received 0 Likes
on
0 Posts
cool, more pics would be great. your FC just has the right look to it. nice work.
here is ARD T2s FC on an 18" rpf1 setup, cant remember if this was his stretchy or grippy fitment...
so clean!
here is ARD T2s FC on an 18" rpf1 setup, cant remember if this was his stretchy or grippy fitment...
so clean!