Pbm dtss help!!!!!!
#1
Junior Member
Thread Starter
Pbm dtss help!!!!!!
rear upper mount for knuckle
DTSS
lower spherical bearing new
hey guys im having an issue with my PBM DTSS kit. I installed new spherical bearings for the lower mount of the rear trailing arm where the knuckle connects, PBM solid diff, subframe, and upper trailing arm bushings. The holes are not lining up. I have the top bolt in and the dtss bolt (the alignment ring facing up to the trailing arm) in kind of loose and i can't get the top bolt to go straight in, it keeps pushing the alignment dowel out. any help would be great, SOMEONE THAT HAS HAD THIS ISSUE OR FAMILIAR WITH IT LET ME KNOW!!!!!! I want my FC running again! P.S. any info on how to remove the flywheel would be great too i already got the nut off just need the flywheel off thank you!!!
#2
Junior Member
Thread Starter
RESOLVED The lower spherical bearing on the trailing arm that the rear knuckle attaches too was backwards so even if they do look like it, they are different! this will cause bolt alignment issues.
Thread
Thread Starter
Forum
Replies
Last Post
Honaker510
2nd Generation Specific (1986-1992)
4
04-09-18 12:22 AM