Pbm dtss help!!!!!!
https://cimg3.ibsrv.net/gimg/www.rx7...a488a3de6c.png
rear upper mount for knuckle https://cimg4.ibsrv.net/gimg/www.rx7...3b40ce0a71.png DTSS https://cimg5.ibsrv.net/gimg/www.rx7...a282230693.png lower spherical bearing new hey guys im having an issue with my PBM DTSS kit. I installed new spherical bearings for the lower mount of the rear trailing arm where the knuckle connects, PBM solid diff, subframe, and upper trailing arm bushings. The holes are not lining up. I have the top bolt in and the dtss bolt (the alignment ring facing up to the trailing arm) in kind of loose and i can't get the top bolt to go straight in, it keeps pushing the alignment dowel out. any help would be great, SOMEONE THAT HAS HAD THIS ISSUE OR FAMILIAR WITH IT LET ME KNOW!!!!!! I want my FC running again! P.S. any info on how to remove the flywheel would be great too i already got the nut off just need the flywheel off thank you!!! |
RESOLVED The lower spherical bearing on the trailing arm that the rear knuckle attaches too was backwards so even if they do look like it, they are different! this will cause bolt alignment issues.
|
All times are GMT -5. The time now is 03:05 PM. |
© 2024 MH Sub I, LLC dba Internet Brands