part number for RZ rear calipers

Reply Subscribe

Thread Tools

Search this Thread

Apr 23, 2004 | 10:27 AM

Rx7-AIII

Thread Starter

Full Member

Joined: Mar 2001

Posts: 156

Likes: 0

From: UK

part number for RZ rear calipers

Hi
Does anyone know a part number for the rear calipers for the RZ (17" wheels and 314 x 20mm rear discs). I wouldn't have a clue where to look but am trying to get hold of a pair.
Thanks
Martin

Apr 23, 2004 | 10:38 AM

reza

Rotary Enthusiast

Joined: Dec 2001

Posts: 1,252

Likes: 0

From: Sunnyvale, CA

i would tell you to search, but it is true the stupid search would not take two letter RZ.
There was a post in this section about a year ago that has all that information you are looking for.

https://www.rx7club.com/showthread.p...+rotor+caliper

https://www.rx7club.com/showthread.p...+rotor+caliper

Last edited by reza; Apr 23, 2004 at 10:43 AM.

Apr 23, 2004 | 10:46 AM

rynberg

Lives on the Forum

Joined: Dec 2001

Posts: 14,716

Likes: 10

From: San Lorenzo, California

RZ Calipers:
Left Rear: F1Z4-26-99Z
Right Rear: F1Z4-26-98Z

Rear Rotor: F124-26-25XA

Apr 23, 2004 | 11:07 AM

Rx7-AIII

Thread Starter

Full Member

Joined: Mar 2001

Posts: 156

Likes: 0

From: UK

Cheers Rynberg, saved me a lot of time there.

Apr 24, 2004 | 03:10 AM

Rx7-AIII

Thread Starter

Full Member

Joined: Mar 2001

Posts: 156

Likes: 0

From: UK

Hi Rynberg
I was asking around and have been told that Mazda list a mounting bracket for the RZ. Part number for relocating bracket is F124-26-281 (mounting bracket,
calliper to upright). Is this all that is needed for the bigger discs? The calipers are the same?

Apr 26, 2004 | 10:24 AM

rynberg

Lives on the Forum

Joined: Dec 2001

Posts: 14,716

Likes: 10

From: San Lorenzo, California

Quote:

Originally posted by Rx7-AIII
Hi Rynberg
I was asking around and have been told that Mazda list a mounting bracket for the RZ. Part number for relocating bracket is F124-26-281 (mounting bracket,
calliper to upright). Is this all that is needed for the bigger discs? The calipers are the same?

You shouldn't need a bracket for the REAR calipers, only the FRONT calipers. You need to read SleepR1s write-up about the brakes in the Archives section -- good advice there!