painted my wheels gunmetal.....
Trending Topics
#10
Banned. I got OWNED!!!
Thread Starter
Join Date: Jun 2002
Location: Buckhead
Posts: 3,323
Likes: 0
Received 0 Likes
on
0 Posts
I don't have any before pics, but mine were scratched up pretty good. I hit the curves alot. all you need to do is get a rough and fine file, some fine sand paper and 00 grade steel whool. take the rough file to the RIM of the wheel where you have curb scratches. Once you have that filed down use the fine sand paper then the steel wool. if you have no scratches just use steel whool on the entire wheel. Then I dust the wheel off and use alcohol or windex to clean the weel. I used a brush to get all the dust off.
then you need to make a decision how your going to paint. You can either mask the wheel which is a pain in the *** or you can clean the paint off the wheel after with paint remover or mineral spirits. I chose the later of the two.
I got Dupli Color Wheel paint, it was the charcool metalic color (gunmetal look). shake the can well and hold it about 1 foot from the wheel and lightly spray. I do this until its even. Then I went to the next wheel and did the same thing. It took less than 1 can for the entire 4 wheels. I put 3 coats of the paint on it. in 1 hour I used the Dupli Color clear coat. I did the same thing, put 3 coats on it. Be careful not to make it run. I had NO problems at all. I chose to leave the wheels on the car. I masked the body of the car so no overspray, and I masked under the wheels (the rotor/brakes).
In the end it looks perfect, you cant even tell they were painted. Had I the equipment and time I would have taken the wheels off, but in the end it was alot faster and looks just as good.
David
then you need to make a decision how your going to paint. You can either mask the wheel which is a pain in the *** or you can clean the paint off the wheel after with paint remover or mineral spirits. I chose the later of the two.
I got Dupli Color Wheel paint, it was the charcool metalic color (gunmetal look). shake the can well and hold it about 1 foot from the wheel and lightly spray. I do this until its even. Then I went to the next wheel and did the same thing. It took less than 1 can for the entire 4 wheels. I put 3 coats of the paint on it. in 1 hour I used the Dupli Color clear coat. I did the same thing, put 3 coats on it. Be careful not to make it run. I had NO problems at all. I chose to leave the wheels on the car. I masked the body of the car so no overspray, and I masked under the wheels (the rotor/brakes).
In the end it looks perfect, you cant even tell they were painted. Had I the equipment and time I would have taken the wheels off, but in the end it was alot faster and looks just as good.
David
#12
Senior Member
Join Date: Nov 2001
Location: Manassas, VA
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
Wow those are really nice. You should make a follow up post in a couple months and let us know how they are against the elements. I guess as long as you prep properly they should be as sturdy as powdercoating right?
#13
Banned. I got OWNED!!!
Thread Starter
Join Date: Jun 2002
Location: Buckhead
Posts: 3,323
Likes: 0
Received 0 Likes
on
0 Posts
I bought it a Kragen, but all the auto stores carry it. 1 can of paint and 1 can of clear coat is all you need.
Its like night and day. the pictures do NOT do justice, they look like new wheels now.
Its like night and day. the pictures do NOT do justice, they look like new wheels now.
#14
Banned. I got OWNED!!!
Thread Starter
Join Date: Jun 2002
Location: Buckhead
Posts: 3,323
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by RedFD
Wow those are really nice. You should make a follow up post in a couple months and let us know how they are against the elements. I guess as long as you prep properly they should be as sturdy as powdercoating right?
Wow those are really nice. You should make a follow up post in a couple months and let us know how they are against the elements. I guess as long as you prep properly they should be as sturdy as powdercoating right?
The clear coat is really strong, plus the paint was designed for wheels. I think of it like your car, its painted right? The same elements hit your car as it does with the wheels.
Prep is the key.
#15
Senior Member
Join Date: Nov 2001
Location: Manassas, VA
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
Thats true. It is probably just more prone to getting hit with rocks though. And the heat and brake dust. But if thats what it is designed for then it should be cool. Again... Nice job.
#16
Originally posted by ZeroBanger
Had I the equipment and time I would have taken the wheels off
Had I the equipment and time I would have taken the wheels off
#17
Banned. I got OWNED!!!
Thread Starter
Join Date: Jun 2002
Location: Buckhead
Posts: 3,323
Likes: 0
Received 0 Likes
on
0 Posts
The clear coat does dry pretty hard. If you look at your stock wheels they still have the factory clear coat on it. I would be extra careful when taking the wheels off. Someone could potentially scratch them with the tire gun, when removing your wheels. Its really easy to touch up, so if they get scratched all I need to do is sand that part back down with steel wool and repaint. 5 mintues.
#20
Eats, Sleeps, Dreams Rotary
Like your style...
Zerobanger,
I like your style and willing to try something new.....
First it was the post on recovering your leather seats and dyeing the interior black......
now these NICE *** wheels!
Great JOB!!
I like your style and willing to try something new.....
First it was the post on recovering your leather seats and dyeing the interior black......
now these NICE *** wheels!
Great JOB!!
#21
Full Member
Join Date: Feb 2001
Location: Pockyville
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
Those look good. But you could've gotten them powdercoated for anout $60/wheel which would have made the finish much more durable.
Chances are there is a powdercoater in (or around) your town.
Looks cool though.
Chances are there is a powdercoater in (or around) your town.
Looks cool though.
#22
Banned. I got OWNED!!!
Thread Starter
Join Date: Jun 2002
Location: Buckhead
Posts: 3,323
Likes: 0
Received 0 Likes
on
0 Posts
I know about powercoating, but again thats 240 bucks and I live in bay area, so its likely more than that. I paid 10 bucks and about 1 hour 20 minutes and they look great.
David.
David.
#24
Full Member
Join Date: Feb 2001
Location: Pockyville
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by ZeroBanger
I know about powercoating, but again thats 240 bucks and I live in bay area, so its likely more than that. I paid 10 bucks and about 1 hour 20 minutes and they look great.
David.
I know about powercoating, but again thats 240 bucks and I live in bay area, so its likely more than that. I paid 10 bucks and about 1 hour 20 minutes and they look great.
David.