Opinions ??? Volk 18 x 8.5/9.5
#3
Rotary Motoring
iTrader: (9)
I just put 17x8.5 +30 and 17x9.5 +40 volks on my FC w/ 255/40 and 275/40 tires.
You will most likely need a 5mm to 10mm spacer for the front depending on how your coilovers are made/set.
You could use an eccentric bolt (crash bolt) to move the strut away from the rim (towards positive camber) to make some more room on the inside.
I would positively locate the eccentric bolt by brazing a washer on it and drilling through the washer/ strut housing for a screw.
Those rims would look good on your car!
You will most likely need a 5mm to 10mm spacer for the front depending on how your coilovers are made/set.
You could use an eccentric bolt (crash bolt) to move the strut away from the rim (towards positive camber) to make some more room on the inside.
I would positively locate the eccentric bolt by brazing a washer on it and drilling through the washer/ strut housing for a screw.
Those rims would look good on your car!
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM