No

 

The fronts are a bit too much for me, but can someone take a guess on these wheel specs, or does anyone actually know?

 

im curious about those side skirts. any info on them anyone?

 

Its the feed FD ones. There is a group buy going on right now, in CF or FRP

https://www.rx7club.com/group-buy-ce...oiler-1003174/

 

17x10+18 front
18x10.5+22 rear
Falken 615K 235/40/17 front 245/40/18 rear

 

Maybe you know if he runs spacers up front? I have a set of R17 10j ET15 wheels and i'm afraid that fronts won't fit or i will have problems with fitting or it hitting suspension on full lock while drifting. Would they fit or i should search for narrower wheels for front?
Sorry if it is obvious answer but i have experience only with Nissans.

 

hey there.what tires you running on the back and did u have to roll ur guard much.as i have a set of te37 coming 18x9.5 and 18x10.5

 

Really Clean did you have to use any spacers??!

 

No spacers, clears the Tein coilovers by about 1/4" in the front

 

His nick is J.T.P. on the forum, maybe send him a PM

 

Thanks, will do that

 

my friend is running a similar set up should come out nicely

 

What suspension is on this?

 

i have 17x8 in the front and when i turn hard or fast my inner rim rubs on my shocks any ideas y
any1 else have the same problem

 

What' the offset of the wheels and tire size?

 

I'm going to be mounting a set of 17x8.5 +34 offset wheels f & r. I assume this would fit fine with my Tein Flex type coilovers. Any tire recommendations as far a size is concerned?

 

Very helpful information guys. Thanks!

 

You will probably need a spacer (like 99% sure). I have Tein Flex as well (different springs), and 17x8 +35 all around. They come REALLY close to the front suspension.

Just a heads up.

 

Ok, luckily I have some laying around. Thanks for the heads up.

 

18x8 / 18x9 both +35.... How will this look?

 

Would a 17x9 with a 25 offset fit on a fc? And what size tires should I go with ?

 

That's gonna be cutting it close, might need a slip on spacer. What's the application? I mean you could rock a 205 if you wanted for SUPAH TYTE HERRAFRUSH lol. But probably between a 235-255 should be good, probably a 40 or 45 series. Someone correct me if I'm wrong.

 

I want some what stretch tires but not bead bopping that you can stick a finger in .

I want more of a form and function , 225/45/17? Yay or nay ?

 

Tyrestretch.com - Image Library

Check out that page. Goes by width, then tire size then wheel diameter

 

Could 18x9.5 with a +15 Offset fit? Planning on a drop as well.