Black91n/a

Man, people need to learn how to budget properly. It seems like every day on this forum another person overspends on expensive huge wheels and can no longer afford to get tires that fit.

USS CJ

**** you miss the point every time bro.

that car does suck until its driven though.

diesel11679

can we get back to the topic of the thread instead of bashing on eachother? I've done some searching for wheel sizes on various threads and wanted to run this by you guys. Will the following work with stock fenders?
Front:
18"x8" +30mm (with 225/45-18)
Rear:
18"x9.5" +35mm (with 265/35-18)

Or is there anything else that I should be looking at? Thanks!

Black91n/a

You need to read the forum rules that prohibit profanities and personal attacks, and then you need to learn to take a joke, because in the end that's what you and those like you are to the rest of us.

90FC

Fronts should fit perfect with stock fenders.

Rears "should" fit... Depending on how much camber you run, the quarters might need to be rolled.

unicorn_squad

there was no personal attack. and there's never been **** about profanities on this forum.


and you think any of us even take ourselves seriously? if anyone took 'us' as anything other than a joke I would be shocked.

Wezzmo

NJGreenBudd

iTrader: (1)

Sport Max 962's in Gun Metal : 17 x7 +38 and 17 x9 +35 . I have Kumho Ecsta ASX's in 225/45-17 and 245/45-17. These are the sizes recommended on her a few weeks ago. Do you think I should run a small spacer in the front to make it more flush.

I haven't had a chance to drive it with the new suspenion and wheels, my new differential is waiting on a dock in boonton for me. I hope once I drive it will settle a

K!NCH

iTrader: (2)

Sportmax/XXR 009 17x8 +35

RETed

Yo ent ballah unless you stretch like dis...
BIZZAM!


-Ted

EJayCe996

That is so many levels of wrong

J.T.P.

iTrader: (13)

CO learned from CA.. don't forget.

USS CJ

no one listen to chance, he doesnt drive.

JTP is 100% correct here

Bizmarkie

Is that lowered at all? I'm thinking about putting those same wheels on my red FC and I was actually looking for pics, so thanks.

93nissan

run more camber.... Then it would look way sick.

DC13B

16x7.5 +20 offset all around

evileagle

iTrader: (1)

Front 17x8 +22
Rear 17x9 +27 or +17

This gonna fit under stock FC bodywork/suspension? It's been a long time since I've slapped wheels on an FC.

Roen

iTrader: (2)

Overfenders probably, unless you follow the new trend of high camber angles, which i don't understand.

coxxoc

iTrader: (3)

Fronts will stick out just a bit. Rears will be close. 17x8 + 30 is flush up front.

Josh

90FC

eh, I think he would be ok.

As long as you roll the fenders and add a little camber, you should be fine.

Christopher W.

iTrader: (2)

How about these numbers. I have Cusco coilovers.

The wheels are Advan RGII

front 17x8.5 offset 31 235/45/ZR/17

rear 17x9.5 offset 25 265/40/ZR/17

I am thinking about rolling the inside of the fender lip. I don't want to change the appearance of the fender from the outside. If I did that could I get anymore tire on these wheels?

Roen

iTrader: (2)

Go with a 245 up front if you can fit it, more front end grip couldn't hurt especially with 265 rears.

Josh18_2k

iTrader: (3)

the rear is gonna be a really close call. they'll be right on the fender lip with normal camber (like 1 degree), but should tuck under rolled inner lip with more camber.
you might need a slight pull, but it shouldnt be noticable

Christopher W.

iTrader: (2)

Yea, after talking to my body man I am not going to roll the fender. This car is two perfect to risk cracking paint. I looks like I might stay with the 9" wheel in back and just stay with a 255. I don't know how well a 265/40/17 fits on a 9" wheel.

So, with the 31 offset on the 17x8.5 front can someone tell me if the 235/40/17 seems to be a safe decision.

The thing about the 17x8 wheel for the front is that the only two offsets available are a 45 or 37.

Thanks for you guys input. This is hard when everything has to be shipped from different suppliers, put together and then test fitted. If it doesn't fit........

RETed

None of your combinations fit.


-Ted