anybody have the torque spec for the driveshaft in the rear to the rotor?

i need it

thanks

 

If you mean the driveshaft to the rear end, it's 37-43 ft lbs

 

there is only one driveshaft. it connects the transmission to the differential/rear gears.

there are half shafts. (2). they connect the rear gears to the hub. the brake rotor fits over the hub and has a screw that you can pitch or use.

there is a large nut on the end of each half shaft. torque is critical and is 175-230 ft pounds. you may re-use this nut but make sure to re-stake it.

i hope this helps, if you are referring to some other component ask away.

howard coleman