Need measurements for 99 spec calipers
#1
Eats, Sleeps, Dreams Rotary
Thread Starter
Need measurements for 99 spec calipers
I finally decided on some Volks for the car but am trying to be **** about the fitment especially since Volk won't/doesn't guarantee the fitment.
The measurement I need is the caliper height * #3 in the diagram
and a measurement on how far outboard (radius) the caliper is compared to stock
The measurement I need is the caliper height * #3 in the diagram
and a measurement on how far outboard (radius) the caliper is compared to stock
Last edited by 7racer; 09-08-04 at 12:50 PM.
#2
Lives on the Forum
7racer, if you look at Volk Racing (Japan site) they have a fitment table. Look for the offsets with a notation that says (big calipers for FD, or FD big calipers).
Example: CE28N, 18 x 9.5, *+47 is meant for the big front calipers of FD. Before the site was updated, this was in English?
http://rayswheels.co.jp/cgi-bin/cgi/...odelName=CE28N
I did a rough measurement once. I recall, a minimum of 40 mm caliper clearance. My SSR Integal A2 in 9 x 17, 45-mm offset are 45 mm in caliper clearance. Good luck!
Example: CE28N, 18 x 9.5, *+47 is meant for the big front calipers of FD. Before the site was updated, this was in English?
http://rayswheels.co.jp/cgi-bin/cgi/...odelName=CE28N
I did a rough measurement once. I recall, a minimum of 40 mm caliper clearance. My SSR Integal A2 in 9 x 17, 45-mm offset are 45 mm in caliper clearance. Good luck!
Last edited by SleepR1; 09-08-04 at 02:32 PM.
#3
Eats, Sleeps, Dreams Rotary
Thread Starter
Thanks Manny!
I did and according to the site I need Disk B for the front. But since all of the wheel places have a no refund policy I was trying to double check the clearance and have one of the Volk dealers check the pad height on their wheels. Just being extra ****.
I did and according to the site I need Disk B for the front. But since all of the wheel places have a no refund policy I was trying to double check the clearance and have one of the Volk dealers check the pad height on their wheels. Just being extra ****.
Thread
Thread Starter
Forum
Replies
Last Post