Need Help Finding Decently priced and looking wheels(Rims)
Well I am just finding out that the SSR Integral A2 Silver are discontinued. I am trying to find some but chances are slim.
So here I am after spending a few hours searching for what might look as good or better then the SSR Integral A2 and not burn a hole in my pockets. Below are my current specs I'd like to keep the Size 17 inch the same. Don't think it will matter if I change to 17 x 8 but the offset needs to be at least 38. I think Silver or Gunmetal should look good.
Help me out guys not finding the sites that carry some nice wheels for decent prices.
Size: 17X9
Lug Pattern: 5X114.3
Off Set 38
Car is Silver 1993 FD3 with GC Coilovers and Koni Yellow shocks.
So here I am after spending a few hours searching for what might look as good or better then the SSR Integral A2 and not burn a hole in my pockets. Below are my current specs I'd like to keep the Size 17 inch the same. Don't think it will matter if I change to 17 x 8 but the offset needs to be at least 38. I think Silver or Gunmetal should look good.
Help me out guys not finding the sites that carry some nice wheels for decent prices.
Size: 17X9
Lug Pattern: 5X114.3
Off Set 38
Car is Silver 1993 FD3 with GC Coilovers and Koni Yellow shocks.
Your best best is going to be finding some used rims. 4 decent tires to go on 17x9 will run you about $600-700 or so after shipping, mounting and balancing.
That's going to bring your rim money down.
If you like that 5-spoke design, 5zigen FN01R-C is similar and you could probably do that setup, with wheels for under $2000. Here's a picture of xchaos' car with them:
https://www.rx7club.com/attachment.p...postid=2863839
That's going to bring your rim money down.
If you like that 5-spoke design, 5zigen FN01R-C is similar and you could probably do that setup, with wheels for under $2000. Here's a picture of xchaos' car with them:
https://www.rx7club.com/attachment.p...postid=2863839
Trending Topics
**** i have to look up the offsets.........i have it super low with tein coilovers and it rubs a little on the driver side during severe turn ins. hyper black. i might take pics tomorrow. i m installing my hks titanium muffler.........that **** is loud. it's gun metal color. kvn
SSR comps are the best bang for your buck... they are very light and forged and look good and not too expensive
You can save huge buying used rims. I bought my Volks (see sig) off of ebay and got a great deal on them and they included tires.
-scott
You can save huge buying used rims. I bought my Volks (see sig) off of ebay and got a great deal on them and they included tires.
-scott
Originally Posted by fd3virgin
**** i have to look up the offsets.........i have it super low with tein coilovers and it rubs a little on the driver side during severe turn ins. hyper black. i might take pics tomorrow. i m installing my hks titanium muffler.........that **** is loud. it's gun metal color. kvn
Let me know
but what about these rims?
http://www.wheelmax.com/Wheels/AZA/AZA.htm
im looking at the Z-2, they offer (2)(235/40/18) 8.5 for the front and (2)(265/35/18) 9.5 for the back, rims and tires for 1699.. is that a good deal? also, are A.Z.A a reliable name?
http://www.wheelmax.com/Wheels/AZA/AZA.htm
im looking at the Z-2, they offer (2)(235/40/18) 8.5 for the front and (2)(265/35/18) 9.5 for the back, rims and tires for 1699.. is that a good deal? also, are A.Z.A a reliable name?
In the Honda and Suby world they have a company called Rota that makes cheap good looking wheels anyone like that make ones for the Gen 3 Seven?
17 x 8.5 or 17 x 9
18 x 18.5 or 18 x 9
17 x 8.5 or 17 x 9
18 x 18.5 or 18 x 9



