Need Help With FC Upgrades
#1
RIP Icemark
Thread Starter
iTrader: (4)
Join Date: Oct 2002
Location: Aloha OR
Posts: 1,481
Likes: 0
Received 0 Likes
on
0 Posts
Need Help With FC Upgrades
Well I just got the car back on the road and the wornout suspension needs to be fixed, as just about everything is worn out. My car is a 1987 FC N/A (Mods in Sig), I want my car to handle as good or better than a friends RX8.
1. Bushings- Energy Suspension polyurathane bushings.
2. Springs- Racing Beat, or Ground Control Coilovers.
3. Shocks- I am thinking of Tokico HP's just to save money, is the adjustability of Illumina Shocks that big of a deal?
4. Wheels/Tires- Definatly going with Enkei RPF01's, 17x8 on all corners with 235/40R17. I thought about 17x9 255 wide with wider front fenders, but it's probly a bit much.
5. Braces/What not- Mazdatrix triangulated bar with engine brace, what ever for the rear. Would the lower suspension braces be a waste?
1. Bushings- Energy Suspension polyurathane bushings.
2. Springs- Racing Beat, or Ground Control Coilovers.
3. Shocks- I am thinking of Tokico HP's just to save money, is the adjustability of Illumina Shocks that big of a deal?
4. Wheels/Tires- Definatly going with Enkei RPF01's, 17x8 on all corners with 235/40R17. I thought about 17x9 255 wide with wider front fenders, but it's probly a bit much.
5. Braces/What not- Mazdatrix triangulated bar with engine brace, what ever for the rear. Would the lower suspension braces be a waste?
#3
Senior Member
Join Date: Feb 2002
Location: sav GA
Posts: 260
Likes: 0
Received 0 Likes
on
0 Posts
your setup sound so good
but i would get a completed set from k2rd.com
and you mean "lower suspension braces "
is anti-rool bar?
Energy Suspension ?
anybody have a write up to install these?
i see there alot in the kit... i just don't know where to start
but i would get a completed set from k2rd.com
and you mean "lower suspension braces "
is anti-rool bar?
Energy Suspension ?
anybody have a write up to install these?
i see there alot in the kit... i just don't know where to start
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM