need advice on fitment plz
10-08-11, 06:20 PM
#1
Junior Member
Thread Starter
Join Date: Jul 2011
Location: el paso
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
need advice on fitment plz
ok so i should be getting my powered by max coils in at the end of this month and im looking for shoes for the car already..obviously a fc..and im digging the xxr 526s hard
but i dont know if the sizes i want will be able to fit correctly
so im in need of some expert advice
fronts 17x9 +25 which seems like they would barely barely fit with pull and stretched tires but backspacing seems a lil high and worried might hit coils backspacing 5.98" or 151.90mm which leaves 3.02 for the outter lip..will these fit?
rears 17x10 +20 now these are whats really bugging me the backspacing on these are 6.29" or 159.76mm which to me seems like too much backspacing but im unsure because i havent seen a definite max backspacing width since everyone seems to have a different measurement ...i know the rears will almost deff. need a pull if not more
so what do u guys think? will these fit with pbm coils?
thx for any insight
but i dont know if the sizes i want will be able to fit correctly
so im in need of some expert advice
fronts 17x9 +25 which seems like they would barely barely fit with pull and stretched tires but backspacing seems a lil high and worried might hit coils backspacing 5.98" or 151.90mm which leaves 3.02 for the outter lip..will these fit?
rears 17x10 +20 now these are whats really bugging me the backspacing on these are 6.29" or 159.76mm which to me seems like too much backspacing but im unsure because i havent seen a definite max backspacing width since everyone seems to have a different measurement ...i know the rears will almost deff. need a pull if not more
so what do u guys think? will these fit with pbm coils?
thx for any insight
11-05-11, 02:34 PM
#3
Up front you will need somewhere between +15 and +20 based on my experience.
In Rear you will definitely need to roll and pull.
A lot depends on tire size. Based on the fact that you are getting PBM I would say you're trying to do the stretch/drifter look. then you are probably undersizing tires. I'm not sure.
215/40/17 front and 235/40/17 rear?
rishie
In Rear you will definitely need to roll and pull.
A lot depends on tire size. Based on the fact that you are getting PBM I would say you're trying to do the stretch/drifter look. then you are probably undersizing tires. I'm not sure.
215/40/17 front and 235/40/17 rear?
rishie
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM