hey guys im trying to compile some information on peoples Mickey Tompson ET tire sizes. post what size et's your running and what whp your at and pretty much your throughts of grip. if you can also state your wheels your using for them that would also be appreciated. im looking for something to run that the track and with the boost high its 450+ so i need something to grip but dont need overkill! thanks guys!!!

 

You can't do it by just how much power you make, your gearing, the OD of the tire, how you launch, auto vs manual, and your suspension are all factors here.

Do you have a FB, FC, or FD? Auto or manual? Do you have a two-step rev limiter?

Basically, all that I can say is 'bigger is better' and you're gonna want to get as big of a tire out there as you can... and consider having small rims so you have more sidewall, and obviously dropping pressure when you drag vs when you drive there on them, if you do.

And at least on FC's I know that the stock rear suspension, just with new bushings, and sometimes when a little worn out can actually hook up pretty well granted you can adjust camber so you dont go too negative on launch.

Sorry I cant help more but you have to realize its not just power that determines how fast you go for the first 60 feet!

 

if you have an fd just throw on some mt et street 26x10.5x16 and call it a day if you cant find the 10.5's just use the 11.5's... everyone i know with a fd wether they have 350rwhp or 550+rwhp use these

-dj

 

26/11.5/15 rear

26/4.5/15 up front

 

your such a pimp

 

all the gold makes the brothas go