Looking to put new wheels on my rx7
#1
Full Member
Thread Starter
Join Date: Jul 2005
Location: Fort Worth, TX
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Looking to put new wheels on my rx7
I was looking to buy either these
MB Wheels
Enkei RSV
or these Konig Next
Out of these three sets of wheels which would look better on my 88 RX7. The car is black so im choosing to go with the bronze wheels.
Also what size should i get the wheels and what tire size.
The car is completly stock, and is not dropped just to let you all know.
give me some suggestions..
MB Wheels
Enkei RSV
or these Konig Next
Out of these three sets of wheels which would look better on my 88 RX7. The car is black so im choosing to go with the bronze wheels.
Also what size should i get the wheels and what tire size.
The car is completly stock, and is not dropped just to let you all know.
give me some suggestions..
#2
I got my wheels off of ebay 17" adr's which weight 22 lbs. I went with the 215-45-17 in front and 225-45-17 in the rear, the rims are 17x7. Im dropping my car 1.5" so I went with the 215's in the front so I didnt have to run spacers. BTW my cars getting painted next month and im going with a rattlesnake black pearl/black red pearl.
Last edited by jgrts20; 04-05-06 at 01:12 PM.
#4
Full Member
Thread Starter
Join Date: Jul 2005
Location: Fort Worth, TX
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
well i definately love the bronze look over chrome, id leave chrome as a last result if i had no choice... but either way. if i chose the 17's what would be the lowest i can drop the car, and still be able to drive rub free in the front.
#5
well I believe with the 215's your are gonna be pushing it at 1.5" drop, but theres other things you can consider like getting a different offset other then the 40 offset I have. I will be close with the 215's on my car w/o running spacers in the front that is.
Last edited by jgrts20; 04-05-06 at 01:46 PM.
#6
Full Member
Thread Starter
Join Date: Jul 2005
Location: Fort Worth, TX
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
well i dont need to drop the car i dont mind it being the way it is but i shall see once i put the wheels on... cause currently i have the stock 15's with stock wheels and the wheel gap is not alll that bad
Trending Topics
#9
Full Member
Thread Starter
Join Date: Jul 2005
Location: Fort Worth, TX
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ARD T2
Ya the MB's are a good wheel for FC. The others are probably whack widths. The MB i think has a good width for the FC. Get the evo fitment. Probably 17x8 +35ish.
Rishie
Rishie
thnx and thnx everyone for the input..
looks like ill be getting the MB wheels.. as soon as I buy them ill post images og them
#13