Suspension/Wheels/Tires/Brakes

Koni Yellow strut height settings..stock??

Thread Tools
 
Search this Thread
 
Old Jun 4, 2006 | 05:24 PM
  #1  
BLitzed33's Avatar
Thread Starter
...
Tenured Member 10 Years
 
Joined: Aug 2004
Posts: 802
Likes: 0
From: md
Koni Yellow strut height settings..stock??

anyone know what setting the stock ride height is for the koni yellow struts,,,they have the three notches that a snap ring fits in under the spring perch to adjust the height...I figure it would be the highest notch, but could be wrong...maybe the middle. If anyone knows, greatly appreciated. Thanks
Reply
Old Jun 4, 2006 | 06:23 PM
  #2  
rynberg's Avatar
Lives on the Forum
Tenured Member: 20 Years
 
Joined: Dec 2001
Posts: 14,716
Likes: 10
From: San Lorenzo, California
It's the highest. A lot of people run lower perch settings at the rear with aftermarket springs to even out the ride height, but do NOT run a lower setting up front. You will wear through fender liners in short order.
Reply
Old Jun 4, 2006 | 06:37 PM
  #3  
BLitzed33's Avatar
Thread Starter
...
Tenured Member 10 Years
 
Joined: Aug 2004
Posts: 802
Likes: 0
From: md
Thanks, I have the stock springs on there, but wasnt sure about the height settings.
Reply
Old Jun 4, 2006 | 08:30 PM
  #4  
CCarlisi's Avatar
Rebreaking things
Tenured Member 10 Years
 
Joined: Jun 2001
Posts: 2,586
Likes: 0
From: 1 foot in Boston 1 in NJ
https://www.rx7club.com/showthread.p...highlight=koni
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
antman0408
2nd Generation Specific (1986-1992)
4
Oct 5, 2015 04:33 PM




All times are GMT -5. The time now is 05:54 PM.