just got some 17x7 adr concept gunmetal rims for my FC ~offset?
#1
Senior Member
Thread Starter
Join Date: Jan 2004
Location: DALLAS TX
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
just got some 17x7 adr concept gunmetal rims for my FC ~offset?
well at first i belived that anything with a 35-45 offset would work for an FC, and these are a +43 offset, but i stopped by a rotary shop today and one of the guys there said that theyd have to be 40 to fit. are these rims going to work for me?
btw i have an 88 GXL if that helps
http://cgi.ebay.com/ebaymotors/ws/eB...ayphotohosting
btw i have an 88 GXL if that helps
http://cgi.ebay.com/ebaymotors/ws/eB...ayphotohosting
#2
EX Pres of DFW Drunks
Can't really help you on the fitment, but those are the same ones I looked at for my 1st gen, but they only came in 42mm offset (16x7) and didn't work...
Trending Topics
#10
Senior Member
Join Date: Nov 2001
Location: San Marcos TEXAS
Posts: 494
Likes: 0
Received 0 Likes
on
0 Posts
I tried a 17x7 +42 with a 215/40 17 Yokohama A520 that rubbed the suspension. My suspension was pretty fuxor'd though - could be part of the problem (90 GXL with AAS if that matters).
Yes, you could take it too a rim shop and have them cut the wheel up and piece it back together with a lower offset. Why not just get some hubcentric spacers?
Yes, you could take it too a rim shop and have them cut the wheel up and piece it back together with a lower offset. Why not just get some hubcentric spacers?
#11
rock a 5mm spacer.. do FCs really need to rock such high offsets? Sorry if thats kinda stupid question, but im a nissan s13 guy always liked the fc and thats a high offset for us.
#13
The infamous number guy!
Join Date: Dec 2002
Location: Terre Haute, IN.
Posts: 1,953
Likes: 0
Received 0 Likes
on
0 Posts
They can be picked up at most local rim dealerships at a cost of ~$8 a piece. Longer studs are recommended with this type of spacer, but i've yet to actually hear of anyone snapping or stripping studs with only a 5mm spacer.
Thread
Thread Starter
Forum
Replies
Last Post
NickNac113
1st Generation Specific (1979-1985)
13
10-01-15 09:25 PM