Just confirming...but do I dare ask???
#1
Full Member
Thread Starter
Join Date: May 2002
Location: Calgary
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Just confirming...but do I dare ask???
Ok all this is the situation
off a s2000
Axis reverb
18x8.5 225/40 offset 45
18x9.5 265/35 offset 55
assuming I know what I am doing on the FD tire sizing(jim lab) it appears this will work as follows:
Tire width (mm) 225 265
Aspect ratio 40 35
Tire diameter (in.) 25.08 25.30
Actual speed (60 mph indicated) 61 61
Front wheel offset (mm) 45 55
Tire clearance, outside (in.) 0.77 0.91
Tire clearance, inside (in.) 1.23 0.09
this is what i get....kinda concerned with the inside of the rears(also I am lowered with eibachs and tokicos...thinking I might need spacers?
Thanks a bunch
Later
off a s2000
Axis reverb
18x8.5 225/40 offset 45
18x9.5 265/35 offset 55
assuming I know what I am doing on the FD tire sizing(jim lab) it appears this will work as follows:
Tire width (mm) 225 265
Aspect ratio 40 35
Tire diameter (in.) 25.08 25.30
Actual speed (60 mph indicated) 61 61
Front wheel offset (mm) 45 55
Tire clearance, outside (in.) 0.77 0.91
Tire clearance, inside (in.) 1.23 0.09
this is what i get....kinda concerned with the inside of the rears(also I am lowered with eibachs and tokicos...thinking I might need spacers?
Thanks a bunch
Later
#4
NASA geek
iTrader: (2)
LOL, that is NICE. Now if you'd be so gracious to make one for the FC. Have you seen the freakin FC wheel fitmit thread? Its turned from "heres how to figure it out" to, I want 20X15 rims for my car all the way around, will these fit? over and over and OVER again.
~Mike................
~Mike................