I was in the market for tires, and just purchased a used set of 16x8 +32 offset SSR Integrals with 245/45/16 Yoko AVS Sport tires. The previous owner had them on a 93 300zx for about 1000 miles. I need both new hubcentric rings and lugs to fit the wheels on my FD.

Questions:

1) Do ALL Integrals have 73mm centerbores, or would Integrals sold for use on the 300zx have a different size? I think I need a 73->67.1 ring, but want to confirm.

2) The offset isn't ideal, but I'm hoping it will still fit the FD. Worst case, I'm putting the tires on my stock rims and selling the Integrals to an FC owner. Are FC hubs also 67.1mm?

3) What do you think Integrals are worth in this size?

 

I think you should plan on selling, because I don't believe they are going to fit. +32 offset is way too low

 

Yeah the offset is tad low, but will be ok at the 3.5 inch front space limit for fronts, assuming stock overall diameter of 25 inches. Yes 73 to 67 mm hubcentric rings are what you need.

 

Why did you buy aftermarket wheels that are the same size as the stock? Stocks are about the best wheel around at that size.

 

The price for the SSRs AND the Yokos with 1000 miles on them was basically the same price as a new set of Yokos. Whether I end up selling the SSRs or my stock set, I come out ahead. The SSRs and stock wheels are within a few ounces of each other.

 

it will fit an FC!

 

Yeah, the offset is perfect for a FC. If they don't work for me, I'll have them up for sale later this week. Will sell either the SSRs (16x8 +32) alone, or can have Pirelli P8000 Vizzolas 225/50/16 with 60% tread mounted.