Holy Work Lippage!!!!!
07-10-03, 12:53 AM
#1
Holy Work Lippage!!!!!
What's up Gents. Well I got my wheels within 5 weeks for the widebody.
I got Work Termist S1C. Look very similar to the SSR SP1 Professor. But we are a distributor for this line and therefore can get these at amazing prices in pretty custom fitments.
http://groups.msn.com/AutomotiveRD/w...nw?albumlist=2
Check them out. Please post them on the board if you can. So we don't have to link.
Peace.
18,10 and 11.5.
I got Work Termist S1C. Look very similar to the SSR SP1 Professor. But we are a distributor for this line and therefore can get these at amazing prices in pretty custom fitments.
http://groups.msn.com/AutomotiveRD/w...nw?albumlist=2
Check them out. Please post them on the board if you can. So we don't have to link.
Peace.
18,10 and 11.5.
07-10-03, 01:27 AM
#4
Carl. Rubber isn't that bad actually. More selection in better diameters for 18's.
Tire rack has the 335/30/18 for $165 per tire in the Michelin Pilot Sport. That's what I have. Then get 275/35/18 for the front. Cars with this much power have to have good tires. When adding it up this was a great deal.
I bought 8 of the 335's for stock and got sponsored on the fronts indirectly from Michelin.
Rishie
Tire rack has the 335/30/18 for $165 per tire in the Michelin Pilot Sport. That's what I have. Then get 275/35/18 for the front. Cars with this much power have to have good tires. When adding it up this was a great deal.
I bought 8 of the 335's for stock and got sponsored on the fronts indirectly from Michelin.
Rishie
Trending Topics
07-10-03, 10:04 PM
#9
Word Mike. lol.
Hey Dom,
i'm trying to get the widebody down to LA next week so Kent and I can get a coo shop for it and the FD. We gonna have two widebody RX's at his disposal., woo hoo. FC and FD. lol.
So the widebody will be down there, but it's ugly. I need to get the RE-A kit molded to the Tripoint. Then slap these biatches on there and drive it straight to SS. lol. We'll see. looks like i'm gonna have to drop the motor and do everything down there before we head over. I'm basically gonna be in LA for two weeks putting this together before SS.
If that doesn't make it, at least Kent will have the other GP Sports FC we're building for him. That will be done for sure. The show stopper.
The Race car has lots of work to do before I want to release pics and stuff to the public.
Thanks,
Rishie
I gotta look at my schedule. When's the D1?? I been so busy i haven't been checking calendars.
Hey Dom,
i'm trying to get the widebody down to LA next week so Kent and I can get a coo shop for it and the FD. We gonna have two widebody RX's at his disposal., woo hoo. FC and FD. lol.
So the widebody will be down there, but it's ugly. I need to get the RE-A kit molded to the Tripoint. Then slap these biatches on there and drive it straight to SS. lol. We'll see. looks like i'm gonna have to drop the motor and do everything down there before we head over. I'm basically gonna be in LA for two weeks putting this together before SS.
If that doesn't make it, at least Kent will have the other GP Sports FC we're building for him. That will be done for sure. The show stopper.
The Race car has lots of work to do before I want to release pics and stuff to the public.
Thanks,
Rishie
I gotta look at my schedule. When's the D1?? I been so busy i haven't been checking calendars.
07-11-03, 01:43 AM
#10
Senior Member
iTrader: (1)
Join Date: Feb 2001
Location: Maryland
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by ARD T2
I gotta look at my schedule. When's the D1?? I been so busy i haven't been checking calendars.
I gotta look at my schedule. When's the D1?? I been so busy i haven't been checking calendars.
Too bad i won't be in the area in time for this.
07-11-03, 10:18 AM
#11
Mod Powers...gone!
Join Date: Apr 2001
Location: SoCal
Posts: 1,522
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by ARD T2
...i'm trying to get the widebody down to LA next week so Kent and I can get a coo shop for it and the FD. We gonna have two widebody RX's at his disposal., woo hoo. FC and FD. lol.
...
If that doesn't make it, at least Kent will have the other GP Sports FC we're building for him. That will be done for sure. The show stopper.
...
...i'm trying to get the widebody down to LA next week so Kent and I can get a coo shop for it and the FD. We gonna have two widebody RX's at his disposal., woo hoo. FC and FD. lol.
...
If that doesn't make it, at least Kent will have the other GP Sports FC we're building for him. That will be done for sure. The show stopper.
...
Dude, w/ the RE-A kit and the GP Sports kits on your cars, you're buying up all the available body kits!!!! I was supposed to get the RE-A kit for my car dammit! hahaha
Where are you staying at while you're in town? Relatives house?
You should definitely be in town for D1. Seriously.
Dom
07-11-03, 01:28 PM
#12
i'm def gonna try. I stay in aliso viejo with some boyz. not too far from huntington or in San Clemente. I got friends in the marines so I stay pretty far south.
But we've started the expansion project and are in the process of setting up wholesale representation in SoCal. I'm trying to get **** setup here and then will be in LA quite a bit to work on marketting and promotions for several of our vendors.
I'm trying my darn best to get some amazing FC's produced. We're building a few twin projects actually. Mostly all the FC's are white as well. lol. So we'll have on sibling in NorCal and an identical one in SoCal as well.
So ya, since we're distributor of GP i really want to get the car done and same for RE-A. Hopefully this will entice FCers to get better jobs so we can have a bunch of sick *** FC's in the game again. Time to start selling the FD's and get FC's. Only way to be unique now. hehe.
Chris get your *** over here. lol. Hurry up. I talked to Zeal and i think we'll get you your **** for the 33. shhhh. They've got the drift pad compound as well for brakes.
KIT Dom,
Rishie
I can't get a trailer next week, so maybe the following. We should get together if time allows.
But we've started the expansion project and are in the process of setting up wholesale representation in SoCal. I'm trying to get **** setup here and then will be in LA quite a bit to work on marketting and promotions for several of our vendors.
I'm trying my darn best to get some amazing FC's produced. We're building a few twin projects actually. Mostly all the FC's are white as well. lol. So we'll have on sibling in NorCal and an identical one in SoCal as well.
So ya, since we're distributor of GP i really want to get the car done and same for RE-A. Hopefully this will entice FCers to get better jobs so we can have a bunch of sick *** FC's in the game again. Time to start selling the FD's and get FC's. Only way to be unique now. hehe.
Chris get your *** over here. lol. Hurry up. I talked to Zeal and i think we'll get you your **** for the 33. shhhh. They've got the drift pad compound as well for brakes.
KIT Dom,
Rishie
I can't get a trailer next week, so maybe the following. We should get together if time allows.
07-12-03, 05:05 AM
#13
Senior Member
iTrader: (1)
Join Date: Feb 2001
Location: Maryland
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by ARD T2
Time to start selling the FD's and get FC's. Only way to be unique now. hehe.
Time to start selling the FD's and get FC's. Only way to be unique now. hehe.
Originally posted by ARD T2
Chris get your *** over here. lol. Hurry up. I talked to Zeal and i think we'll get you your **** for the 33. shhhh. They've got the drift pad compound as well for brakes.
Chris get your *** over here. lol. Hurry up. I talked to Zeal and i think we'll get you your **** for the 33. shhhh. They've got the drift pad compound as well for brakes.
07-14-03, 11:34 PM
#14
Full Member
Join Date: May 2001
Location: FL
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
I aint tryn to hate or nothin but whats up with that step on the lip? with that step and the bolts it makes the 5 star middle look like it could fit in a 16" wheel. maybe look better in person, nice deep lip though
Thread
Thread Starter
Forum
Replies
Last Post
maikelc
3rd Generation Specific (1993-2002)
8
08-24-15 11:04 AM