i have a flat front right and it seems whoerver put this tire on here put some mixmatch bs nut on one of the studs and it has been totaly striped ant *** it looks somehow it looks like one piece like the stud molded with the nut....please someone help what do i do....bcause all i can afoord at the moment is my 2 tires not a tow truck and shop labor

 

Ok if there is no possible way to get the nut off, take a dremel or grinder and cut a line fight down the middle about 1/4 in deep (make it thin). Then take a punch (not sure what it's called, but it looks like a big screwdriver and you hit it with a hammer and with each hit it recoils and spins slowly). Should get it off.

 

tryed that well in some way....but i end up taking it apart from the inside out....from inside the hub...well i got 4 new tires now so no worriess