Ground Control For FC
#1
Senior Member
Thread Starter
iTrader: (5)
Join Date: Jan 2002
Location: Texas
Posts: 650
Likes: 0
Received 0 Likes
on
0 Posts
Ground Control For FC
I got a big problem, anybody got the intructions for how to install the kit?
I bought the kit about a year ago and never installed them. Now that I'm gonna install them I don't got the freaking instructions. Anybody got a site or have the instructions handy that could make me a scan of it? Would appreciate it very much
87 TII
I bought the kit about a year ago and never installed them. Now that I'm gonna install them I don't got the freaking instructions. Anybody got a site or have the instructions handy that could make me a scan of it? Would appreciate it very much
87 TII
#2
Rotary Freak
iTrader: (22)
Well it's pretty easy. What kind of struts do you have?
If you have tokiko's you might need to grind away a small portion of the top of the strut housing so the sleeve will slide over. Once you slide this over all you have to do is place the collar on the sleeve, then the spring, and then the upper spring perch, with the locking nut.
That's it, you don't need to cut the original spring perch if you don't want to. Depends on what wheels and offsets you plan to run. If you're not going to wide, then you don't need to bother.
Good luck, Rishie
If you have tokiko's you might need to grind away a small portion of the top of the strut housing so the sleeve will slide over. Once you slide this over all you have to do is place the collar on the sleeve, then the spring, and then the upper spring perch, with the locking nut.
That's it, you don't need to cut the original spring perch if you don't want to. Depends on what wheels and offsets you plan to run. If you're not going to wide, then you don't need to bother.
Good luck, Rishie
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Shainiac
Single Turbo RX-7's
12
07-17-19 02:20 PM