alright i'm getting some 5zigen FN01R-C wheels for my 90 gxl. i was thinking of getting the 17" set in hyper black (car is crystal white). only question i got is what exact size i should get and offset to use. i tried searching but i got no definte answer. thanks a lot!

http://www.5zigenusa.com/w_fn01rc.html

 

http://www.fc3spro.com/TECH/MODS/RT/rims.htm

 

i'd go with a 17x8 +30 offset all the way around....put 235s front and 245s rear and youre set...

 

17x8 +30 offset sounds nice. the FC3S Pro chart is saying 225, so would 235 and 245 be too wide?

also my suspension is stock right now, but i'll be upgrading my suspension this month.

Here's their chart for the wheel:



sorry i'm a noob to wheels. my first pair of rims!

 

get the matt black. the hyper black is just grey not black

 

+35 for 8" FRONT wide +35 for 9" REAR
I have this set up and it doesnt rub. I also have the matte black color

 

my co-worker just put a set of hyper black on his yellow mr2. they look nice.
the way he described them they change colors with lighting. he said it goes from a gunmetal to a silver look. and he said at one point they looked bronze, but i think they were just reflecting the yellow from his car.

 

i woud go with the black w/ the polished lip they would look better on your white car

 

you can run 235/40r17 on a 17x8 +35 front and 255 or 265/40r17 on a 17x9 +35 rear under stock fenders.

I did and it was sweeeeeeetness...

 

buy mine


https://www.rx7club.com/showthread.php?t=498376

 

17x10 in the back is too big, gota use a way smaller tire wich makes it look chunety

 

you can do 17x9 +15 front and 17X10 +15 in the rear no problem maybe have to roll but not pull

 

Im using a 17x8 and 17x9 +25 offsets with 235/40/17 Toyo RA1s all around and fits no problem. Im gonna be selling mine soon to go with a 17x9+20F and 17x10+25R on stock fenders.

 

Ok so make sure to consider whether or not you will be buying coilovers. That might change the offset a bit. If you don't get coils these wheels in a +35 will work fine.

Rishie

 

just FYI my car has 17x9 0 17x9 -15 FN01C on it stock fenders just rolled and pulled.

 

hey everyone. im about to get some rims and after reading the thread i think im going to get some zigens. the size im getting is +35 for 8" FRONT wide +35 for 9" REAR. is this going to rub? im getting some coilover is a month or two if that changes anything. thanks

Gabe

 

With the 8" +35 you might hit the coils depending on which ones you get.

Run a 225/45/17 and a moderate lowering height. You should be good.

Worst case get a cheap 3mm universal spacer.

Rishie