FD Chassis Setup
Thread Starter
Joined: Aug 2006
Posts: 398
Likes: 8
From: Space Coast Florida
FD Chassis Setup
Just finished getting the car back together and need to have it aligned.
Replaced all of the bushings including the pillow *****
Running the stock 16" wheels with 245 BFG G-Force T/A's
Tokico shocks and springs (car lowered 1.75")
95% street, 5% long track
Considering
Front: Toe=1/16", Camber=-1.3, Caster=6
Rear: Toe=0, Camber=-1.1, Thrust Angle=0
What are you guys setting up your's at?
Chart is Pettit's recommended specs...
Replaced all of the bushings including the pillow *****
Running the stock 16" wheels with 245 BFG G-Force T/A's
Tokico shocks and springs (car lowered 1.75")
95% street, 5% long track
Considering
Front: Toe=1/16", Camber=-1.3, Caster=6
Rear: Toe=0, Camber=-1.1, Thrust Angle=0
What are you guys setting up your's at?
Chart is Pettit's recommended specs...
The long track or street setup will work fine. Between the two, you'd probably never notice the difference if you tried both. The FD is pretty forgiving when it comes to changes in static camber.
Thread
Thread Starter
Forum
Replies
Last Post
Shainiac
Single Turbo RX-7's
12
Jul 17, 2019 02:20 PM
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM