Evos Brake on rx7?
#6
bow leggin'
iTrader: (25)
Trending Topics
#9
the implications matter
iTrader: (1)
Join Date: Dec 2005
Location: Tustin, CA
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
Back can work but you lose the E-brake so most folks don't do it.
Front fit OK but you have to machine the rotors down on the OD if you want proper caliper clearance. The piston bores are all huge so your brake bias gets trashed immediately. I now it can be dialed back to rights with a balance bar but I'm not sure if an adjustable prop valve has enough travel.
Plan on a bigger MC/booster too so your pedal isn't mush. I looked at this and ended up doing a DIY mandeville setup instead.
Front fit OK but you have to machine the rotors down on the OD if you want proper caliper clearance. The piston bores are all huge so your brake bias gets trashed immediately. I now it can be dialed back to rights with a balance bar but I'm not sure if an adjustable prop valve has enough travel.
Plan on a bigger MC/booster too so your pedal isn't mush. I looked at this and ended up doing a DIY mandeville setup instead.
Thread
Thread Starter
Forum
Replies
Last Post
jim_chung
1st Gen General Discussion
6
08-27-15 11:42 AM