Does anyone know anything about this item? Any good or should I just for-get-about-it


http://cgi.ebay.com/ebaymotors/BIG-B...=p4506.c0.m245

 

wilwood is good

 

Thats a good deal

 

+1 ... Wilwood is legit. That's not an "eBay brand."

 

Okay I am going to get them. Where can I get the dust shields that will fit the rotors????

 

They are good, but they don't fit under the stock 16-inch wheels.

Be sure to get their "fitment" template to test first.

:-) neil

 

Also, since they are ONE-PIECE, VERY HEAVY . . .

They'll be nice with R-compounds . . .

:-) neil

 

I am running the 17 inch OEM wheels. I do not think I will have a fitment issue

 

Nice!

BTW: you'll have to bend, cut, or remove your rotor splash shield. . .

:-) neil

 

How hard of an install is this?

 

If you've changed your front rotors before, it's just a little harder because you have to change out brake-lines and do a proper brake bleed, as well as either CUT/Bend the splash shield.

The proper way would be to remove the splash shield, which may require removing the front hub which if I was going to do, would mean re-packing the bearings (washout out all the old grease), new seals, and a dial-indicator to setup the pre-load.

:-) neil

 

Just cut the shield with a dremel.

 

This is a dumq question and i have searched, but what size are the stock front rotors?

 

11.6" for the FD