coilovers on + 300zx wheels 60series tires=doesnt move
11-02-08, 08:40 PM
#1
Senior Member
Thread Starter
iTrader: (7)
Join Date: May 2008
Location: charlotte, NC
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
coilovers on + 300zx wheels 60series tires=doesnt move
just put my coilovers on my 88 FC...( i don't know what brand they are, got a realy good deal..and they are solid)....but my problem is i have z32 wheels with stock like tire size... the rim and tire literally both rubbing HARD..like i cant drive it at all..not even 1 foot....is this common? oh btw its rubbing on the perch and coil..
my guess is i need extended wheels studs..and like 10 mm spacers. im going to be running s14 SE wheels...with a 50 series tire...i cant and will not go aftermarket.
my guess is i need extended wheels studs..and like 10 mm spacers. im going to be running s14 SE wheels...with a 50 series tire...i cant and will not go aftermarket.
11-07-08, 06:32 PM
#2
Emerald Triangle for life
iTrader: (5)
Join Date: Jan 2002
Location: Fort Collins, CO
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
The search button is your friend. This has been covered many, many times. There is in fact a monster thread in this very section on FC wheel fitment. The short answer is that the offset on stock wheels is +40, so you'll need to make up the difference with spacers.
