brake pulsation after brake fluid flush
I flushed the brake fluid and immediately after that, I am noticing a pulsation (similar to when your rotors are warpped) when I step on the brake 1/2 way at highway speed. I am pretty sure this is not warpped rotors as this problem didn't surface until the fluid change.
Any idea on what I should look for??
Any idea on what I should look for??
Probably is "warped" rotors* You feel the pulsation more now b/k the OLD fluid was compressible enough to absorb the pulsations and the NEW fluid transmits them to the pedal.
* Rotors don't "WARP" per-se they develop thickness variations due to brake pad deposits and hardness variations caused by improper cool down after hard use.
* Rotors don't "WARP" per-se they develop thickness variations due to brake pad deposits and hardness variations caused by improper cool down after hard use.
Last edited by maxpesce; Mar 27, 2003 at 11:11 AM.
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM
The1Sun
1st Generation Specific (1979-1985)
0
Sep 7, 2015 10:21 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
Sep 5, 2015 02:13 PM




