87 RX7 Turbo 2 front diff mount
#1
Junior Member
Thread Starter
Join Date: Nov 2007
Location: garner,nc
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
87 RX7 Turbo 2 front diff mount
I am looking for a good source for the front diff mount on my t2 because the mount keeps breaking and need to replace it.
#6
Rotary Freak
iTrader: (3)
what you need is HELP part # 31052
available at autozone, and other fine auto parts retailers.
its a $7 pinion snubber that will save your diff mount. do it!
if you take out your bins/back seats, you will see a 1/2" wide circle right in the middle between the depressions. simply drill the hole out, and mount the snubber. no more broken diff mounts ever! unless you have ultra bad wheel hop. then maybe.
available at autozone, and other fine auto parts retailers.
its a $7 pinion snubber that will save your diff mount. do it!
if you take out your bins/back seats, you will see a 1/2" wide circle right in the middle between the depressions. simply drill the hole out, and mount the snubber. no more broken diff mounts ever! unless you have ultra bad wheel hop. then maybe.
#7
Junior Member
Thread Starter
Join Date: Nov 2007
Location: garner,nc
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Well here is an up date we found a rear subframe at a junkyard for 30.00 bucks .
my firend who works for a nascar shop is fabbing up some extra support for it so it doesent tear out the subframe bracket .
I am makeing a solid mount useing an old mount as a jig . as soon as we get started on it we will post pics .
Yes I will use a pinion snubber as well .
when we are done it will be unbreakable.
my firend who works for a nascar shop is fabbing up some extra support for it so it doesent tear out the subframe bracket .
I am makeing a solid mount useing an old mount as a jig . as soon as we get started on it we will post pics .
Yes I will use a pinion snubber as well .
when we are done it will be unbreakable.
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Nov 2007
Location: garner,nc
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM