I've got an older 626, (1982 rwd) that supposedly has the same hub setup as the early RX7's. It's a 4 x 110mm bolt spacing. I can't find any aftermarket rims with this spacing but have seen cars on-line of this era with aftermarket rims. Just wondering if any of the old RX7 owners who had this type of setup had any ideas? I hate the thoughts of adapters but that looks like the route I'll have to take. Also it doesn't have lug nuts, it has lug bolts.

Thanks

 

Here is a diagram to help demonstrate the number of choices you have when it comes to 4x110 wheels:



The verdict: look hard, get lucky, or use adapters.
There's a fre guys who know who sells some 4x110: I'm sure they'll chime in.

Try teh 1st gen section if you don't get anything.

 

roh wheels from australia will drill 4x110 wheels

 

Wheel choices for this particular bolt pattern are few and far between. Most that are available are used old school wheels.

 

I am aware of the lack of choices in this size. Thanks for pointing out the obvious, that was a big help.

 

You want help?

I have a set of 3 piece epsilon wheels that I am selling. 15 X 7 $1200 + shipping. There you go, problem all gone.

 

for what it's worth, you're probably not going to garner much help with this kind of attitude, but ...

i think Panasport and Kosei also make wheels for the 4x110 bolt pattern, in addition to ROH.

 

I have a set of 16x7 Team Dynamics wheels for sale, with the 4x110 bolt pattern. Look in the 1st gen for sale section

 

Panasport, accept no other.

 

I had a set of BBS 15 X 7's. I also had a set from another manufacturer (14 X 6), but I can't remember the name right now. There were several companies that made rims in that pattern. Good luck finding a used set. Finding a new set may be impossible.

 

If you've got the price of admission, I believe Simmons (aussie wheels) will drill their semi-custom wheels for 4x110.
There are a few pics of FB's with these wheels under the first gen section.