15 X 7 Wheels For FB
#1
Junior Member
Thread Starter
Join Date: May 2008
Location: Chepachet, RI
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
15 X 7 Wheels For FB
Hi. New here.
I have an '84 GSL-SE which I hope to use in Vintage Racing at some point, after I have completed some much needed maintenance. In reviewing the rules for vintage events, it seems that an increase of 1" over stock wheel diameter is the most permitted. But it seems there are not many choices of 15X7 wheels that fit the 84's 4X110mm bolt spacing.
Any thoughts/suggestions?
Anyone got wheels for sale that would serve my purpose?
Thanks.
I have an '84 GSL-SE which I hope to use in Vintage Racing at some point, after I have completed some much needed maintenance. In reviewing the rules for vintage events, it seems that an increase of 1" over stock wheel diameter is the most permitted. But it seems there are not many choices of 15X7 wheels that fit the 84's 4X110mm bolt spacing.
Any thoughts/suggestions?
Anyone got wheels for sale that would serve my purpose?
Thanks.
#2
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,829
Received 2,597 Likes
on
1,845 Posts
panasports! vintage racing?
#4
As eprx said...you have the 4x114.3 pattern....you have a WIDE range of choices...just offset is +38 to +40 range....unlike the +20 offset of 4x110 versions. Many used rims available too!
Alothough....my buddy with an SE has SSR mesh with a pretty low offset (+15 I believe) without clearance probs...make sure you run a 195 tire in the front with low offsets, his 205's rub a tiny bit.
Alothough....my buddy with an SE has SSR mesh with a pretty low offset (+15 I believe) without clearance probs...make sure you run a 195 tire in the front with low offsets, his 205's rub a tiny bit.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM