Super AFC Normal AFM Percentage Readings?
05-23-08, 09:22 AM
#1
Normal AFM Percentage Readings?
What is a "normal" range of AFM percentage readings when running the monitor on the SFACII?
I am only seeing a range of 2% to maybe a max of 60% at full throttle.
Is this normal?
The car has a problem making power when hot. Runs great when cold.
I don't think that this is an install or wiring problem as the car ran great for the first 15K miles that I have owned it and the problem comes and goes so I suspect that the AFM may be failing.
Background -
The car is a S5 NA vert with a paxton super charger.
The SFACII was installed and tuned on a dyno by a knowledgeable shop for the guy I bought the car from. I recently had to replace the TPS and adjusted it per specs. The problem existed before I made this change.
The TPS reading on the SFACII is wired to the wide range pot on the TPS.
I am only seeing a range of 2% to maybe a max of 60% at full throttle.
Is this normal?
The car has a problem making power when hot. Runs great when cold.
I don't think that this is an install or wiring problem as the car ran great for the first 15K miles that I have owned it and the problem comes and goes so I suspect that the AFM may be failing.
Background -
The car is a S5 NA vert with a paxton super charger.
The SFACII was installed and tuned on a dyno by a knowledgeable shop for the guy I bought the car from. I recently had to replace the TPS and adjusted it per specs. The problem existed before I made this change.
The TPS reading on the SFACII is wired to the wide range pot on the TPS.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
RotaryBobby
1st Generation Specific (1979-1985)
1
09-10-15 01:33 PM