Yes...WOT on both tests....the car ran like a bat out of hell when Scott and I autocrossed it (well bat out of hell as much as a stock ported 12a can....)

Today I am going to do the sea foam trick.... I will get the engine hot.....do a compression test....then let her gulp seafoam like a sick *****.....shut her down and sit for half hour and then go blow her out...

I will then check the compression again...

 

Yeap! That seafoam does wonders, I pulled the 12a out of my car and looked thru the exhaust ports and the rotors looked like someone polished the hell out of them 80's , you may also want to do some steam cleaning after the seafoam.

 

Well Seafoam is magic...now my compression numbers for the front rotor is 94/89/93...

Much better than having two numbers in the 50's...

 

seafoam. Nice. We can get some down by surfside. The reds are running.

 

If only I could get $8 for a pint of Surfside Seafoam....

 

The New Lemons motor porting and Larry's motor ready (minus turbos)

 

 

Just some misc pictures, but I know how everyone loves pictures


Best 200 bucks EVER

1 Bad 1 Ok 1 GREAT, The Great one is for the lemons engine

 

Here is the new lemons motor

 

How do you know if the e-shaft is bad and what would cause it to fail Chuck?

 

Damn Chuck...you been busy!! The other day when I came over you were just starting the porting on the Lemons!!!

 

Bearings will cause a bad e shaft or heavy scratchs

 

Looking good! What kind of porting did Larry's motor get (bridge port)?

Is that a rotary fan?

 

Larry got a small Streetport

 

Well update....

The lemons motor has been broken in WELLLLL, it ran both days at the lemons race without any problems to the motor, but it did kill the NA trans. It is FAST as hell.

I cleaned my garage out and put my FD back inside, time to start working on it, Got the hood, bumper, side skirts, and sleek headlights to install. THEN THEN PAINT

I picked up Keiths Repu today and it is living at my place for a little while, I will get the motor installed for him shortly.

While keith was here i saw a WTF moment, and i share it with you now.

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/HxnIeg562VA&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/HxnIeg562VA&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

 

Air pump with a bad clutch being spun by vacuum from the engine?

 

FC air pumps don't have clutches.

Thats proves that Keith's car blows no matter what.

 

Lol!

 

Giggty Giggty Goo!!!!!

 

we got larry's motor in and installed and the pedal assymbly. i say we cause i was too stupid to do it my self and took 4 hours. not to mention i failed not once not twice but three times on the brake pedal assymlbly only. but when it was all said and done larry's motor started on the first try just like chuck said it would. i will post the video of larry car starting on youtube later. i learned a lot of things from today.

 

Very Nice


I should be called the First Start Wonder

 

video i just posted it on youtube.

http://www.youtube.com/user/SpideyFa.../0/mfC1bnqxMzQ

 

wow, larry finally has a runnin fd again, nice

 

once and I will say it again. If you gave lessons I would defiantly pay for them in Super Monsters lol. Every time I got to chuck's house I learn something knew even if it takes hours.

 

Well after me and 7dust drank a bunch of beer we got the fd running at his house. It took a min but seems to be running like a champ. I need a power fc. Whos got a extra one just sitting around?
<br>
<br>
<