FS: 4x110 wheels, gsl-se motor/trans/ecu/harness
#1
roadkill hats rock
Thread Starter
Join Date: Jul 2001
Location: Austin, Texas
Posts: 1,396
Likes: 0
Received 0 Likes
on
0 Posts
FS: 4x110 wheels, gsl-se motor/trans/ecu/harness
Last of my FB parts, all located in Austin, TX. Selling the last of my RX-7 parts as the shell itself has been sold. Some day i'll get another one maybe? Prolly a nice ready to drive one though... i miss the fun times in my old street 12a 84. Anyway, for sale is:
$650 - GSL-SE motor and trans, been sitting at least a decade. Most parts appear to be there on the motor, have not tried to turn it over by hand or anything for fear of ruining a housing with a stuck seal. This is what you need to swap any newer 13b into your first gen, has the oil pan, front cover, and engine mount. Or rebuild this puppy and be happy with it. Comes with wiring harness, ecu, even the t2 coil i think was popular for DLIDFIS or DLIFSFLIFIS, whatever that acronym was :P
2 sets of 4x110mm bolt pattern wheels, will fit 79-85 except the gsl-se models as those are 4x114.3. $900 for both, or $500 each. Will come with lug bolts with wheels. If you buy both sets you can have all the bolts i've got. After one set of wheels is gone though, $15 for a set of lug bolts.
16x7 simmons that need refinishing, but hey made in Australia and very cool looking.
13x7 front and 13x8 rear Revolution Wheels out of england, old junk race tires on them you can use for fitment testing but not even sure they hold air anymore. Fronts are 1 piece, rear is 3 piece.
Full album of pics: https://photos.app.goo.gl/7HkcuZQejEfK988XA
$650 - GSL-SE motor and trans, been sitting at least a decade. Most parts appear to be there on the motor, have not tried to turn it over by hand or anything for fear of ruining a housing with a stuck seal. This is what you need to swap any newer 13b into your first gen, has the oil pan, front cover, and engine mount. Or rebuild this puppy and be happy with it. Comes with wiring harness, ecu, even the t2 coil i think was popular for DLIDFIS or DLIFSFLIFIS, whatever that acronym was :P
2 sets of 4x110mm bolt pattern wheels, will fit 79-85 except the gsl-se models as those are 4x114.3. $900 for both, or $500 each. Will come with lug bolts with wheels. If you buy both sets you can have all the bolts i've got. After one set of wheels is gone though, $15 for a set of lug bolts.
16x7 simmons that need refinishing, but hey made in Australia and very cool looking.
13x7 front and 13x8 rear Revolution Wheels out of england, old junk race tires on them you can use for fitment testing but not even sure they hold air anymore. Fronts are 1 piece, rear is 3 piece.
Full album of pics: https://photos.app.goo.gl/7HkcuZQejEfK988XA
Thread
Thread Starter
Forum
Replies
Last Post
grey'85
1st Generation Specific (1979-1985)
18
07-21-16 09:57 AM