RacerXtreme7

iTrader: (2)

Okay, I've an done exhausting search (pun intended ) . Will someone PLEASE with this turbo kit, take off the compressor housing and measure the minor and major wheel diameters, measuring the tip "B" width would be nice also. I'm guessing it will either be a:

If its an actual T04E, I' guessing a 60 trim which means... Major diam. of 2.950" and minor of 2.290"

If its a T04B 60-1 (actually should be called a T04E due to its wheel design, it has the back swept blades and this particular wheel is much more simular to the T04E series then T04B series, but for some reason gets grouped differently) major wheel diam. of 3.000" and minor of 2.324".

Someone please verify..... I'm not looking to make a kit, nor give away company secretes, I just gotta know weather a T04E 60-Trim or a T04B 60-1 will suite my needs. PM me or just post it. BTW a ruler is NOT going to work..lol.. calipers please...

Listing the compressor housing A/R (look for it cast into the housing either on the outside OR stamped just on the inside of the discharge tube) and give inlet and outlet diameters..

~Mike.....

RacerXtreme7

iTrader: (2)

ANYONE???

RacerXtreme7

iTrader: (2)

RacerXtreme7

iTrader: (2)

bump

teachermechanic

iTrader: (4)

Check this address for size t04b:http://www.turbofast.com.au/balstd.html

RacerXtreme7

iTrader: (2)

Thanks, but thats not the info Im looking for. Good reference site though. I know sizes of or know were to look up sizes for all Garrett turbos, im just looking for what size Garrett wheel is in the XS To4e kit..

~Mike.....

RacerXtreme7

iTrader: (2)

I know others want to know also, I've seen simular threads......