Hey guys, does anyone know if the BW S300 8375 will fit with the HKS Cast Iron Exhaust Manifold (for FD)?
Its a .91 AR turbo if that makes a difference here.

From pics iv seen of that manifold installed, im guessing it might close, or maybe need a spacer or some kind?

thanks

 

It wont unless you hammer the shock tower. From my understanding the S360, s362 and s366 all share the same compressor housing. That is what hits with the manifold. Guys have made it work but it is not a direct drop in.

 

Ok cool, thanks
That's good to know, I did not realise they were all physically the same size!

Do you (or anyone) know of any manifolds that will fit them with no bashing required? (Ill do it if it turns out to be one of the better options though)
Would really prefer to keep a single wastegate setup.

The "Kinugawa Turbo Exhaust Manifolds" look decent, better then the other generic ebay ones anyway..they appear to have proper flanges. Anyone know if these are any good / if it will fit?

Any other good options out there?
cheers

 

looks like the "kinugawa" mainfolds are the same as all the other "better" then really crap ebay manifolds floating around.
Looks to be the same ones rx7store sells and a few other places.

Anyone know if it will fit?

 

Here's S366 on HKS cast; the shock tower has plenty of room for me although the frame rail had to be notched and then welded a plate. sits nice and low.