Where can i find a list of tubine housing dimensions, im spicifily looking for the exterior dimenions of a garrett gt24 framed 1.01 ehxuast housing

-Jacob

 

edit: i meant gt42.. damn beer (and sorry for the spelling as well)

 

^

 

found some of them



However i need width (front to back) and total width (left to right) as well to see if it will fit between my LIM and fenderwell w/o changing my manifold


More diemsions for other gt turbochargers are available here

http://www.atpturbo.com/root/turbopi...dimensions.htm

-Jacob

 

I run a Gt 4202 with a 1.01 hotside... i can get the measurements when i see my car at home in a couple weeeks if you want....prolly longer than your looking to wait

and for those wondering i got all my **** back from the theives and money for a new turbo

 

Yes, please do. Your one of the reasons i want to run this turbo. And the wait is fine, i am not starting this project untill i finish the current projects (lots of rebuilding on the house and new siding, and then build a garage)


Also good deal bout getting your stuff back

 

Your 1.01 is a T4 footprint aswell right?
anyway good luck with this, sure worth it once you get into boost with the big guy
ill post up here when i get back home
zac

 

Yes the 1.01

Are you selling your gt42 for something larger? because the non-bb 42 with the 1.01 hotside is what im looking for

 

Nice!Link to story?

 

Well i dont know what i am going to do... i love the way this turbo acted though

See the thing with my turbo i kinda burnt the turbine up a little with high egt's and the theives bent a compressor fin a little ... there are pics in the link about the whole story

I will prolly put the car back together and tune the car and everything with the same turbo....as the there is no shaft play and the turbo is like new asides the turbine

here is links to the whole story, long yes, ridiculous though how it all worked out

http://www.fargostreet.com/forums/sh...hlight=theives

http://www.fargostreet.com/forums/sh...hlight=theives

confusing unless you read the whole thing, everything is explained, just a local forum that came together and it is crazy how it all worked out

 

Wow, i skimmed most of that, however congrad's about finding the thief and taking care of it the correct way.

I didnt know you were robbed, but its good to hear that you got most of what is owed to you back, and from what it sounds like there parents (jean mostly) is working so that you are fairly compensated by making the kid work a couple jobs?

-Jacob

 

Hey man i took some measurements for you this weekend when i was home putting my car together

I would have taken real pictures to post dimmensions on but i left my camera

these are rough only, so you know

You should note on the dimmension sheet you posted above that that is a T6 footprint with a 5"discharge..... so dont go by that thing

this is a 35 housing i put my dimmensions on, this has the right T4 footprint dimmensions and 4" discharge and is very simmilar to what i have

T4 1.01 gt42 turbine housing. non BB




I know I know......... i have mad art skill yo