I am hunting for a set of wires that I can put on my AEM coils.
Now,I have been running into 110 bucks for a set of wires..what??
Where can I get a decent set of wires?..9 or 10mm if possible.
The run of wire is about 16 inches from coil to plug.
Pic is of coil placement and you can see the plugs.Not a long run.
Thanks Lads,STYX!~
Oh,Coils are under that IC pipe clamp..(mounted to frame rail with a custom bracket)

 

MSD universal u-built-it sets. Or have Magnecore make them for around $100.

http://msdignition.com/Products/Spar...ocket/HEI.aspx

 

I have a set of 4 left over. they are brand new. We bought a set of 8 cylinder 8.5 MSD universals w/ Taylor boots
1. http://www.jegs.com/webapp/wcs/store...-1&showValue=1

2. http://www.jegs.com/webapp/wcs/store...-1&showValue=1

As stated above by C. Ludwig. You save some money by not buying the whole set. I will sell the set of 4 MSD 8.5(Red) and 4 Taylor boots for $60 shipped.

 

I've got the MSD sets in stock if you want to go that route. Only way you'll get 10mm that I'm aware of is to have Magnecore make them.

 

I still have to check that Haltech harness w/breakout connector to see if I have L2 in there Chris,I will do that tomorrow.I got the AEM coil connectors all wired(what a Freakin job..you gotta be a Brain surgeon!)
I may be able to get the MSD universal set locally..
anyways I will Yell at ya,if my local lead falls through.
Thanks guys.

 

I ordered the MSD 8 Cylinder Universal set.(The one UP from Part # 31159).They were only 20 bucks more,so I said WTF!.I got em!
So I will have an extra set of wires to play around with.
Should have them tomorrow.

 

Update: got the wires,made them up and I am just waiting on the Haltech Harness.
I will post up a pic when I get the setup together.
...I got an extra set of custom wires..I can make up if anyone is interested...(cough!)